What size drain do I need for a tub?
1 1/2 inches
The proper size for both a bathtub drain and trap is 1 1/2 inches in diameter, regardless of the bathtub size. The type of trap used on a tub drain is a p-trap. Because they are the same size, the trap will glue directly onto the PVC drain pipe without the use of adaptors or fittings.
What should I do before replacing my bathtub drain?
The first thing that you want to do when you are thinking about replacing your bathtub drain is inspect the popup and see if you can remove it by hand. Standard popups screw into place and can be removed by turning them counter clockwise. If the popup is frozen then you will need to use a small vice grip to remove it.
How to replace the flange on a bathtub drain?
How to Replace a Bathtub Drain Flange 1 Drain Key or Smart Dumbell tub drain removal tool 2 Flathead screwdriver (may be needed to remove the stopper) 3 Wrench 4 Bucket or container 5 Plumbers Putty More …
How do you replace a gasket on a bathtub drain?
Squeeze the new gasket into one side of the drain, then push the other side into place. Purchase a replacement gasket right here! Roll a piece of plumbers putty in your hands that is about the same thickness of a pencil. Wrap this underneath the lip of the new flange, making sure that it reaches all the way around.
What do you use to remove drain stopper from bathtub?
Once you have removed the drain stopper, you will see the drain basket (also known as a drain flange) in the drain opening. The drain basket will have a metal crossbar at the bottom. To remove the drain basket, you will need either locking pliers or a tub drain wrench.
How do you remove a tub drain plug?
Pull the drain plug out of the bathtub drain. The drain plug may have a linkage, or hinged piece of metal that holds it in the drain. Remove it along with the drain plug. If the drain plug does not pull straight out, you have a spring-mounted drain plug. Unscrew the drain plug from the crosspiece to remove it.
What are the parts of a bathtub drain?
The tub drain stopper is also part of the bathtub drain assembly, which controls when the water can flow out of the bathtub through the main drain. The main portion of the bathtub drain assembly is a pipe that runs horizontally under the bathtub.
What are the dimensions of a bathtub drain?
A standard modern bathtub drain is 1 1/2 inches in diameter — the width straight across the middle. Rough-in plumbing should be calculated for a 1 1/2-inch pipe.
What is a bathtub drain Assembly?
A bathtub drain assembly is a series of plumbing parts that transport the waste water from a bathtub, feeding the water into a large drainpipe. The bathtub drain assembly is made up of its own series of pipes that are interconnected, and also connect to the large drainpipe.
