What should you do if your water heater pilot light is out?
In this case, if you cannot see a flame burning through the glass, then your pilot light is out. Make sure there is no leaking gas. You should never try to reignite your pilot if there is gas leaking from your water heater, as this is extremely dangerous to both you and your home.
Do you need a manual to light a gas water heater?
While having your heater’s instruction manual around is handy, it’s not entirely necessary, as most gas water heaters require a similar procedure for relighting the pilot light. Check the pilot light.
What to do if you have the wrong pilot light?
If you have the wrong pilot burner replace it with the correct one. Important: Before troubleshooting the pilot light, keep in mind that a pilot flame is always ON and the flame should be blue. If it is yellow, it needs an adjustment. Make sure that the tank is completely filled with water before lighting the pilot light.
What does a yellow pilot light mean on a gas heater?
A typical and healthy pilot should burn with a bright blue luminosity, not a yellow or red. A yellow flame means that there is no sufficient air flow, that the gas combustion is not complete or the pilot tube is dirty. A flickering or wavering flame is an indication of the draft.
What does the pilot light on a water heater do?
The Pilot Light is the heart of your water heater. It’s a small blue flame that burns petroleum gas to produce heat. Without this flame, there would be no heat, and thus no warm water. So, What Are The Reasons Your Water Pilot Light Keeps Going Out?
What does a state tankless water heater do?
State Custom Storage Tanks are designed for storing potable water. Fitting locations of these custom-line tanks match the needs of normal installations. The Product Preservers® Anti-Scale System protects your tankless water heater from damage due to scale formation.
What are the preservers on a tankless water heater?
The Product Preservers® Anti-Scale System protects your tankless water heater from damage due to scale formation. This system does not add chemicals to the water or require electricity. As water flows through the filter, hard water minerals form inactive scale crystals which flow through the water heater without sticking to the heat exchanger.
What makes a state water heater a custom tank?
Multiple head construction adds structural strength and more capacity within the same diameters. State Custom Storage Tanks are designed for storing potable water. Fitting locations of these custom-line tanks match the needs of normal installations.
