What should temperature be on Teledyne Laars pool heater?
Start the filter pump. Turn the ON-OFF switch on the outside control panel to ON. The temperature control knob is set at the Teledyne Laars factory at approximately 78 degrees F (26 degrees C) and locked into place with the Temp-Lok, your safety and energy saving device.
How do you turn on a swimming pool heater?
Hold the gas valve knob down for 30 seconds, then release. Look in the mirror on the floor of the burner tray to confirm the pilot has lit. Turn the gas valve knob counterclockwise to ON. Replace the heater door. Start the filter pump. Turn the ON-OFF switch on the outside control panel to ON.
When to start the heater on a cold pool?
Start with the pointer approximately at the “10 o’clock” position for a pool, and at approximately the “2 o’clock” position for a spa to start with. (Note: A cold pool may take a day or more to reach that temperature, depending on water temperature, humidity, air temperature and wind.
What are the parts of a Laars pool heater?
LAARS 10547802 Complete Heat Exchanger, 8 tube, indoor, Copper, cast iron, glass-lined headers LAARS 10547803 Complete Heat Exchanger, 8 tube, indoor, Copper, cast iron, glass-lined headers LAARS 10547804 Complete Heat Exchanger, 8 tube, indoor, Copper, cast iron, glass-lined headers
What are the parts of a Teledyne pool heater?
Teledyne Laars R0027100 Pool Heater Robertshaw Pilot Burner, Robertshaw 5CH4, W0036700 LAARS 10547801 Complete Heat Exchanger, 8 tube, indoor, Copper, cast iron, glass-lined headers
Hold the gas valve knob down for 30 seconds, then release. Look in the mirror on the floor of the burner tray to confirm the pilot has lit. Turn the gas valve knob counterclockwise to ON. Replace the heater door. Start the filter pump. Turn the ON-OFF switch on the outside control panel to ON.
Where is the temp Lok on a Teledyne Laars?
Turn the ON-OFF switch on the outside control panel to ON. The temperature control knob is set at the Teledyne Laars factory at approximately 78 degrees F (26 degrees C) and locked into place with the Temp-Lok, your safety and energy saving device.
