What should I replace my Cal spa pump with?

Also known as PUUM2302582FJ 1016172 replacement for PUUMSC2352582FR ENERGY EFFICIENT Spa Pump 230 Volt 56 Frame 6.5″ Diameter motor, Two Speed 2″SD/CS 8 Amps. Fits Cal Spas, MAAX, Ultra Jet® Pumps, PUUM Pump Wet End for Pumps rated 11.7 – 12.0 Amps 230V 6.5″ 56Fr motor PUUMS2602582F,

How old do you have to be to replace a Cal spa?

If your spa pack is less than 8 years old, replacing a major component is usually the best route. You don’t have to worry about whether our spa packs will fit your Cal Spas ® hot tub.

What is the size of a spa pump?

Spa main pumps will have a size of either 48 frame, which are approx. 5.5” diameter, or 56 frame, which are approx. 6.5” diameter. Some motors will have the frame size on the unit.

What kind of replacement parts do you need for a spa?

” Replacement spa packs are what we specialize in. We also carry replacements for major components such as pumps, blowers, heaters, and controllers

If your spa pack is less than 8 years old, replacing a major component is usually the best route. You don’t have to worry about whether our spa packs will fit your Cal Spas ® hot tub.

” Replacement spa packs are what we specialize in. We also carry replacements for major components such as pumps, blowers, heaters, and controllers

How does a spa pump work in a spa?

The pump is the heart of the spa. Spa pumps run frequently throughout the day to circulate hot water within your spa to help maintain temperature and help filter the spa water. The spa pump is what circulates hot water through your spa and works in combination of a pump and a motor.

Is the Cal spa power right the same as Cal spa?

For accuracy Pumps should be matched by the Amp rating, not the HP shown. With all that said the original Cal Spa pump has been replaced with the one shown, it is a direct drop in and is rated the same as the original Cal Spa Power-Right pump (WHO IS NOW OUT OF BUSINESS) and is much cheaper and available.

Is there a 6.0 hp Cal spa power right pump?

It replaces both the 12.0 and 13.6 Amp Power Right Pumps. The pump you currently have is a 3.0 HP pump. There is not a true 6.0 HP available in the Spa Industry. Spa manufacturers (including Cal Spa) are famous for up rating the HP by just applying a sticker. For accuracy Pumps should be matched by the Amp rating, not the HP shown.

What kind of pump do I need to replace my hot tub?

NEW replacement spa pumps ready for immediate delivery. Pumps can be ordered with Waterway wet end for replacement on Catalina Spas, LA Spas, etc., or the Vico wet end which is used on the Cal Spas line. Before that, the Waterway was used.

Can a 2 speed spa pump be used?

One Speed Pump Configuration: A 2-speed spa pump can serve single-speed duty by using only the common and high speed terminal connections, while leaving the low speed terminal blank. *If your spa filtration or heating cycle comes on with high speed instead of low speed, this indicates that the high and low speed wires need to be switched.

How many amps does a 120 volt spa pump use?

Note that a 120 volt pump drawing 16 amps uses virtually the same amount of power (wattage) as a 240 volt pump drawing 8 amps. Spa pumps are available in two different frequency configurations: 50hz and 60hz. In North America, the line frequency is 60 HZ.

What should the voltage be on a spa pump?

Read your spa’s owner’s manual, and look at the label on the old pump to determine the appropriate voltage and BHP (break horse power). The label on your old pump should also indicate the horsepower and amps required. Standard (US) household voltage varies between 110 and 120 volts. Larger appliances required 240 volts to function.

Do you need a 60 Hz spa pump?

It is important to order a replacement pump with the correct voltage and line frequency for the country the spa will be operated in. In general for North Americans, 60 HZ pumps will be required as a replacement spa pump for spas in North America. Please verify your current spa pump before ordering!