What should I do with my Pentair swcg?
Reconnected the SWCG, got a steady red flow light. I called Pentair and they told me to disconnect it, make sure it was free of scale, try a degreaser like Simple Green in it and acid clean it if I needed to.
What should the Green Salt Light be on a Pentair pool?
Make sure your salt is OVER 3250. That should give you a green salt light, (if its working). You can replace the sensor/switch yourself (after warranty expires). Pentair won’t send warranty parts without factory service installation. They want to install the part, so correct installation can be verified.
When does the low salt warning light come on?
For every 5 degrees below that, the salt will read 200 ppm low. At 64 o F, the salt will read about 520 ppm low. Below 2,900 ppm, the low salt warning light will come on, but the cell will continue to work. Below 2,500 ppm, the cell will shut off.
When does the low salt light go blank in a pool?
“If the salinity is below 2600 ppm, the salt display will light the red LOW SALT indicator, and the CELL light will go blank, indicating there is not enough salt in the pool for chlorine to be produced.”
Are there any changes to the Pentair intellichlor salt cell?
Pentair has made some significant design changes to the IntelliChlor Salt Cell. In my opinion they’ve simplified the front control panel although the verdict is out as to technical changes that have been released. I’ve been seeking a HOW TO calibrate the IntelliChlor and my sources at Pentair provided this Field Calibration Guide.
Can a Pentair power center be used for ic20?
Yes, the Pentair IntelliChlor Power Center (p/n 520556) can be used for the IC20, IC40, & IC60P Salt Cells. Reblogged this on Red Square Pools (702) 530-7331. I have the newer 3.0 version with less lights. My salt on the Pentair display center shows 2450 ppm and at the store when tested its 3350ppm.
Is the chlorine from intellichlor salt good?
• Green: IntelliChlor SCG is good and producing chlorine No Light: IntelliChlor SCG is off and not producing chlorine. It may be in an off-period of the sanitizing cycle and will
Why does my intellichlor salt level light keep flashing?
Depress the More and Less button together to deactivate Boost mode. If the green light is flashing in the Salt level area this indicates your salt level is high. If the green light is flashing in the Status area this indicates you should inspect the blades of the salt cell for debris and or calcium buildup.
