What should I do if my faucet handle turns the wrong way?
If your faucet handle turns in the wrong direction, the obvious solution is to change the handles. You can’t make this mistake when the levers are connected to the faucet base, but you can make another one. In this case, when a faucet handle turns in the wrong direction, it isn’t the handle that’s to blame but the faucet cartridge.
How do you replace a 2 handle faucet cartridge?
If you have plumber’s grease, apply a small amount to the cartridge’s O-rings, using your finger. Insert the new cartridge into the faucet body in the same orientation as the original cartridge, aligning any tabs on the cartridge with the notch(es) on the faucet body. Push the cartridge all the way into the housing.
Can a faucet be replaced in the other direction?
While replacement valve stems for older faucets are identified as hot and cold by the direction they’re threaded, newer faucets use washerless cartridges that fit either side. A cartridge is much easier to install backward, leading to confusion and potentially hazardous changes in water temperature.
How do you turn a faucet handle 180 degrees?
Rotate the cartridge 180 degrees. Align the two tabs on the side of the cartridge with the slots cut into the lip of the valve body. Insert the cartridge back into the valve body. Thread on the retaining ring and tighten it securely. Place the handle back on the cartridge stem, attaching it with the screw. Press on the decorative cap.
How do you fix a broken kitchen faucet handle?
Reinsert the valve stem and tighten the stem in its socket using a wrench. Insert the packing nut into the stem and tighten it. Replace the faucet knob over the stem, secure with the handle screw, and replace the protective cap. Restore the water supply. You have now learned how to fix a broken bathtub faucet handle!
How do you change faucet in bathtub?
Position the new washer where the old washer previously was and re-tighten it to the valve assembly with a screw. Replace the valve assembly by turning it clockwise and re-tighten it to the fixture with the pipe wrench. Screw the faucet handle back onto the valve assembly and replace the decorative cap.
What are the parts of a bathroom faucet?
A faucet is a device for delivering water from a plumbing system. It can consist of the following components: spout, handle(s), lift rod, cartridge, aerator, mixing chamber, and water inlets.
