What setting do I set my sand filter to vacuum?
To begin vacuuming your pool:
- If you have a sand filter and are vacuuming to waste, set filter to “waste” option.
- Otherwise, leave setting on “filter” and turn pump on to begin vacuuming.
- Vacuum your pool just as you would vacuum your living room, picking up debris or algae as you go.
How do you vacuum a pool with a sand filter?
How To Vacuum the Pool with a Sand Filter
- Remove Large Leave or Debris.
- Attach the Vacuum Head to the Telescopic Pole and Hose Pipe.
- Flood the Hose Pipe With Water.
- Attach the Hose Pipe to the Skimmer or Dedicated Suction Port.
- Vacuum the Pool.
- Disconnect the Hose Pipe from the Skimmer or Dedicated Suction Port.
Can you use a vacuum with a sand filter?
Where vacuuming to a sand filter is not recommended, the multiport valve should be set to Waste. In this setting, the filter is bypassed, and vacuumed water goes straight down the drain to the sewer instead.
Can a pool filter be used to vacuum water?
If your pool filter system includes a multiport valve, it is possible to vacuum the pool by-passing the filter entirely and send the vacuumed water directly to the drain. This is both desirable and advisable when the pool contains a particularly high level of dirt, and especially when the water has an algae problem.
How does a sand filter work in a pool?
The sand inside a sand filter system blocks debris, dirt, and oil. The backwash reverses the flow of water and expels the dirty water via a waste line into the ground or drain. Turn on the pump and backwash for 2 minutes or until the water in the sight glass (located on the filter) runs clear. 9. Turn Off the Pump. 10. Rinse.
When to use multiport valve on pool filter?
You use this setting to clean the sand in the filter, often immediately after you vacuum the pool. This will be one of the multiport valve positions you will use the second most frequently, after the filter setting. It works by the water being redirected the reverse way through the sand filter.
What’s the best setting for a pool vacuum?
The filter setting is the most common and generic setting. It is probably the most used setting for vacuums. You will use this setting for your routine cleaning when the pool is not so dirty. Once this setting is applied, you will see the dirt is trapped in the sand or whatever filter medium you have.
Do you need a sand filter to vacuum a pool?
You can use one or two valve setting for the pool vacuum, depending on the particulate level in the pool water. Having an Intex sand filter to vacuum your pool is totally necessary to ensure the cleanest water for yourself and your family. What Do You Need to Know Before Vacuuming Your Pool?
You use this setting to clean the sand in the filter, often immediately after you vacuum the pool. This will be one of the multiport valve positions you will use the second most frequently, after the filter setting. It works by the water being redirected the reverse way through the sand filter.
How does vacuum to waste work in a pool?
This means using the waste setting on a sand filter multiport valve in conjunction with your pool vac. Vacuuming to waste will remove all dirt and algae from the bottom of the pool by sending it via the waste outlet pipe either to your sewage system or into your yard, instead of going through the pool filter system.
What are the different positions of a pool filter?
You will soon understand what all of the pool filter valve positions mean. There are normally 6 different pool filter settings on a multiport valve which are Filter, Backwash, Waste, Rinse, Recirculate and Closed. Some valves also have an additional 7th position which is Winterize.
