What kind of water filter does Jandy use?

For unsurpassed water clarity, choose Jandy’s DEV Series of Diatomaceous Earth Versa Plumb filters. DEV filters have a curved grid design that creates balanced water flow throughout the filter tank. They accommodate three types of backwash valves: Multiport, Slide and the Jandy NeverLube Backwash Valve.

Can a Jandy pool pump be pressure tested?

These requirements are generally not intended to apply to the pool equipment such as filters or pumps. Jandy®pool equipment is pressure tested at the factory.

How often should I replace my sand filter in my Pool?

However, with proper maintenance, a sand filter will continue to keep your pool clear and clean. While you only need to replace the sand in your pool filter every 5 to 7 years, occasionally you will need to backwash the filter to clear out all the built-up debris.

Where can I find the swimming pool manual?

Procedures in this manual must be followed exactly. For technical assistance, contact our Technical Support Department at 1.800.822.7933. 2.2 Description Dirty water ﬂ ows into a two or three port diverter valve, then into the ﬁ lter through the lower bulkhead on the bottom of the tank and is directed through the DE grids.

How big does a Jandy pool filter need to be?

DEV60 One-of-a-kind pressure gauge/air release valve with built-in water saving Clean/Dirty indicator accurately tells you when the filter requires cleaning. We offer a choice of 48 or 60 square foot capacity models.

What kind of valve does Jandy Dev filter use?

DEV filters have a curved grid design that creates balanced water flow throughout the filter tank. They accommodate three types of backwash valves: Multiport, Slide and the Jandy NeverLube Backwash Valve. The DEV Filters are designed to easily connect with other Jandy equipment via Jandy’s exclusive Versa Plumb system.

These requirements are generally not intended to apply to the pool equipment such as filters or pumps. Jandy®pool equipment is pressure tested at the factory.