What kind of controls are used in a hot tub?
This nerve center controls the functions and equipment in the spa, like the jet pumps, filtration time, and heater. There are two types of control systems used in hot tubs: electronic, digital type systems and older-style mechanical air controls. Digital controls are solid state computer-controlled systems.
What to do if your hot tub has an error code?
To do this, either turn the wheel or the screwdriver slot on the pressure switch counter-clockwise one full turn (two at the most). If this does not make the code go away, then send the board in for repair or replace it. See complete list of error codes here.
What should I do if my hot tub heater is not working?
Before proceeding make absolutely sure that the pump which circulates water through the heater is passing water through the heater and also make sure you see water movement in the spa! If you don’t confirm water is moving in the hot tub and through the heater do not proceed with the next step as in doing so may burn out the heating element.
What to do if your hot tub pressure switch is defective?
To check to see if the pressure switch is defective or miscalibrated, please do the following: Power down the circuit board. Unplug the pressure switch cable from the circuit board, thus revealing two pins. Power up the system. As soon as the low/filter pump turns on, jump the two pressure switch pins on the board with alligator clips.
How to troubleshoot hot tub topside and spa control?
Check the temperature has not been locked. Ensure the buttons are only being pressed lightly. If you can’t sort the problem then check topside is pugged into the circuit board correctly (turn spa off) – if it is then remove decal and check buttons – if they work replace decal / sticker if no control call the proffessionals .
Why is a hot tub control panel important?
A hot tub control panel acts as a timer, keeps the temperature constant, turns off the spa if you forget to, and helps troubleshoot problems with your spa. This is why it is important to keep the control panel in good working order.
Why does my hot tub have an error message?
Hot tub control panel error messages – If your hot tub control panel has been showing an error message you will want to know how to clear it. Even if you have sorted out the problem that the error message is indicating it might still be continuing to show as a problem on the control panel.
When do I need to reset my hot tub control panel?
If your hot tub control panel isn’t working then when it can be really frustrating. Having said that, sometimes all you need to do is a simple reset on your hot tub control panel to clear the problem and to get it back into action.
