What kind of boiler is Baxi Luna 3 comfort?
One of the two models of the Luna 3 Comfort, the 310 fi, is a combination heating and DHW boiler which prioritizes to domestic hot water and does not mix boiler water with domestic hot water. The nickel-chrome, stainless steel design of the premix burner and primary heat exchanger provide resistance to corrosion and low heat inertia.
What should hot water temp be on Baxi Luna 310?
With the T.RISC. in the the on position heating closed loop temperature will operate from 30°C (85°F) to 45° (110°F). The domestic hot water thermostat (#3) will control the temperature of the hot water to a maximum of 65°C (149°F).
What is the installation and service manual for a Baxi boiler?
24-28-35 / 18-24 Installation and Service Manual Wall Mounted Gas Condensing Boiler Baxi MainEco Combi and System Dear customer, Thank you for purchasing this appliance. Please read this manual carefully before using the product and keep it in a safe place for future reference.
Where is the reset button on Baxi Luna 310?
The control panel selector switch (#1) has three positions: center is the off position; to the right is hot water mode only, and to the left is the heating and hot water mode. If the switch is turned fully to the left, this will reset the controls if a fault light is flashing. The reset is spring operated and will return to the normal position.
Why is my Baxi boiler not working properly?
A common culprit for this fault on Baxi boilers is a lack of pressure. If your system is set lower than 1.5 bar then it won’t operate correctly. Now, the quick fix is to top up the pressure using the filling loop. Once you’ve topped up the pressure, you’ll need to reset the boiler.
One of the two models of the Luna 3 Comfort, the 310 fi, is a combination heating and DHW boiler which prioritizes to domestic hot water and does not mix boiler water with domestic hot water. The nickel-chrome, stainless steel design of the premix burner and primary heat exchanger provide resistance to corrosion and low heat inertia.
With the T.RISC. in the the on position heating closed loop temperature will operate from 30°C (85°F) to 45° (110°F). The domestic hot water thermostat (#3) will control the temperature of the hot water to a maximum of 65°C (149°F).
The control panel selector switch (#1) has three positions: center is the off position; to the right is hot water mode only, and to the left is the heating and hot water mode. If the switch is turned fully to the left, this will reset the controls if a fault light is flashing. The reset is spring operated and will return to the normal position.
Where is the hot water switch on Luna 310?
Luna 310 control panel The control panel selector switch (#1) has three positions: center is the off position; to the right is hot water mode only, and to the left is the heating and hot water mode. If the switch is turned fully to the left, this will reset the controls if a fault light is flashing.
How to troubleshoot a Baxi Luna HT boiler?
Flame Sensor is not sensing: 1- Check polarity and ground from the boiler back to the circuit breaker 2- Check for 3-5 micro amps going to the board 3- If you do not have 3-5 micro amps try cleaning the flame sensor Note: Do not clean the flame sensor using sandpaper as it may damage the protective coating.
Luna 310 control panel The control panel selector switch (#1) has three positions: center is the off position; to the right is hot water mode only, and to the left is the heating and hot water mode. If the switch is turned fully to the left, this will reset the controls if a fault light is flashing.
