What is the little red triangle on my water meter?
Many meters have a small red (or blue) triangle on the meter face, designed to detect even small leaks. If this red triangle is moving when you have all water off inside and outside your home, you may have a leak.
Why is my water meter running backwards?
Backflow is when water flows incorrectly in the wrong direction. This would definitely make the meter spin backwards, and warrants a call to your local plumber. Backflow can occur due to either back pressure or back siphonage, which are essentially too high or too low of pressure in the system.
Where is the leak indicator on a water meter?
On almost every meter, there is a “LEAK INDICATOR” it will be a small dial that moves with even the smallest of water flow. It is sometimes in the center of the sweep hand, or it may be off to the side.
How do you read the flow rate on a water meter?
Fill in your meter readings “). Use the number indicated by the sweep arm as the final digit. Wait 20 minutes then read your water meter again and record the numbers. Subtract the first water meter reading from the second. If Gallons Used is greater than zero you have a continuous leak. Observe the flow rate screen for at least 10 flashes.
What do the numbers look like on a water meter?
This typically looks like a small triangle (shown), star or gear. Analog Example: The sweep hand is on the “1” so the read is 1,356,411 gallons. The last number on the right is a static zero (does not change). When the sweep hand is on the “3” the read will be 1,356,413 gallons.
What makes the fine flow indicator turn slowly?
I haven’t really paid attention to this until now, but I realized that the fine flow wheel on the meter turns extremely slowly when i have the system off. The indicator is a small triangle that rotates.
On almost every meter, there is a “LEAK INDICATOR” it will be a small dial that moves with even the smallest of water flow. It is sometimes in the center of the sweep hand, or it may be off to the side.
I haven’t really paid attention to this until now, but I realized that the fine flow wheel on the meter turns extremely slowly when i have the system off. The indicator is a small triangle that rotates.
When do I Turn Off the flow indicator?
The OP indicated that he has some flow “when the system is turned off”. I would take that to be turned off either at the meter or a valve where the supply enters the house, which would seem to be a leak at other than one of the fixtures. I think thiggy has made a good point.
What’s the best way to check a water meter?
The brass nut is soft, so don’t damage it with a regular wrench, pliers, or vice grip. You can use pliers or vice grips, but wrap it with duct tape, cardboard, or a cloth to keep the tool from damaging the nut.
