What is the function of a Latco valve?
The Latco range of pressure control and relief valves has become the new standard in the market as pressure demands increase. The pressure control valve reduces the cold water pressure to the same pressure of the hot water coming from the geyser.
What is the purpose of a pressure valve on a geyser?
The purpose of the temperature pressure relief valve is to release water, and in turn lower the pressure inside the tank, in the event that the temperature or pressure gets too high in your water heater.
How do I increase the pressure in my geyser?
If they are, try increasing the water pressure in your house. To do this, you need to find the pressure regulator on the incoming water line, which usually isn’t far from the water heater. You increase pressure by loosening the locknut and turning the adjusting screw clockwise.
Which type of pressure control is normally open?
Working • This type of valve (which is normally open) is used to maintain reduced pressures in specified locations of hydraulic systems. It is actuated by downstream pressure and tends to close as this pressure reaches the valve setting.
What are LATCo pressure control and relief valves used for?
LATCO pressure control and relief valves are a reliable generation used for hot and cold water systems that save you time and money, offering maximum value at unbeatable prices. The Latco range of pressure control and relief valves has become the new standard in the market as pressure demands increase.
What do you need to know about a geyser valve?
The pressure rating valve must match the pressure rating on the geyser. Multi-valve (pressure control valve): This is a water pressure control valve fitted to the cold water supply to the geyser. The purpose of the pressure control valve is to “balance” the water pressure of the hot and cold water supply to baths, showers, and basins.
Are there any LATCo Neptune pressure regulating valves?
The range of pressure regulating valves comprises 100kPa, 200kPa, 400kPa and 600kPa models. An added benefit for South Africans is that the Latco Neptune valves have no scrap value, unlike their heavy brass equivalents; therefore there is less pilferage from merchants and building sites.
What should the thermostat be on a geyser?
Set the thermostat to 65 deg. C. HouseCheck does not recommend that a higher setting is used. If the geyser is old it may have become calcified and inefficient. In this case consider replacing the geyser. A number of things can cause low hot water pressure. These include old, blocked galvanised pipes, or a dirty or blocked valve.
Where is the pressure control valve on a geyser?
The pressure control valve reduces the cold water pressure to the same pressure of the hot water coming from the geyser. Sometimes plumbers will locate the pressure control valve outside of the house – where the cold water supply enters the house. This is fine. Mostly however the multi-valve will be found in close proximity to the geyser.
LATCO pressure control and relief valves are a reliable generation used for hot and cold water systems that save you time and money, offering maximum value at unbeatable prices. The Latco range of pressure control and relief valves has become the new standard in the market as pressure demands increase.
What do you need to know about low pressure geysers?
Low-pressure geysers usually have spherical “Lacto” valves in place of the modern pressure balancing valves. A pressure balancing valve, fitted on the cold water supply to the geyser, ensures that both the hot and cold water supply to the bathrooms are at the same pressure rating as the high-pressure geyser.
What kind of pipe does a geyser vent need?
This valve should have a 20 mm metal (copper or steel) pipe connected to it and the pipe must lead directly out the building. This vent an important safety feature of the whole system. It must be made of copper or steel – not plastic. The pressure rating valve must match the pressure rating on the geyser.
