What is the default display on Aqua logic?
Turn power on at the main panel and turn the Aqua Logic control power circuit breaker on. The keypad will show the default display. The default display alternates between the day/time, air and pool (or spa) temperature, pool/spa sanitizer setting, and salt level.
What can Aqua logic be used to control?
The Aqua Logic can control pumps, valves, lighting, heaters, and chlorination. Although the Aqua Logic is easy to use, it is important to completely read through this operating manual before attempting to operate the control. NOTE: This manual assumes that the Aqua Logic has been wired and configured according to the Instal- lation Manual.
How big of a pool does Aqua logic need?
The Aqua Logic is designed to handle the purification needs of most residential swimming pools up to 40,000 gallons (150,000 liters), or the needs of most commercial pools up to 25,000 gallons (95,000 liters). Check local codes for other restrictions.
What happens when you change the time on a clock?
Most modern timers keep the settings and times, however some older models can reset to midnight and preset parameters inputted by the manufacturer. In the case of an old mechanical clock, it may have not adjusted when you changed the clocks back or forward according to the season.
The Aqua Logic can control pumps, valves, lighting, heaters, and chlorination. Although the Aqua Logic is easy to use, it is important to completely read through this operating manual before attempting to operate the control. NOTE: This manual assumes that the Aqua Logic has been wired and configured according to the Instal- lation Manual.
Turn power on at the main panel and turn the Aqua Logic control power circuit breaker on. The keypad will show the default display. The default display alternates between the day/time, air and pool (or spa) temperature, pool/spa sanitizer setting, and salt level.
The Aqua Logic is designed to handle the purification needs of most residential swimming pools up to 40,000 gallons (150,000 liters), or the needs of most commercial pools up to 25,000 gallons (95,000 liters). Check local codes for other restrictions.
How many valve actuators can an aqua logic Aql-P-4 control?
The AQL-P-4 can control up to 4 high voltage (120/240V) pieces of equipment, up to 3 automatic valve actuators, and a conventional and solar heater. Both manual and automatic (programmed) operation are available.
Is the Aq logic line subject to interference?
The wireless system for the AQ-LOGIC line is subject to interference from outside sources. You would need to change channels under the settings menu, 5 channels are available, you will need to re-teach all wireless units when the channel is changed.
Why is the salt level on my Aqua logic so low?
Looked at the control panel For my Hayward Aqua Logic AQL-P-4 shows low salt. I just added a bunch of salt about a month ago and it was working fine.
The wireless system for the AQ-LOGIC line is subject to interference from outside sources. You would need to change channels under the settings menu, 5 channels are available, you will need to re-teach all wireless units when the channel is changed.
