What is the circuit number for the easytouch pool control panel?

What is the circuit number for the easytouch pool control panel?

POWER ON EasyTouch Wireless Control Panel (8 circuit) (P/N 520547) iS10 Spa-Side Remote Controller (P/N 520149) vi EasyTouch Pool and Spa Control System User’s Guide

Where to install easytouch control system indoor control?

WARNING- For units intended for use in other than single-family dwellings, a clearly labeled emergency switch shall be provided as part of the installation. The switch shall be readily accessible to the occupants and shall be installed at least 10 feet (3.05 m) away, adjacent to, and within sight of, the unit.

Where is the Terminal Bar on an easytouch pool?

A terminal bar stamped is located inside the supply terminal box. To reduce the risk of electric shock, this terminal must be connected to the grounding means provided in the electric supply service panel with a continuous copper wire equivalent in size to the circuit conductors supplying this equipment (no smaller than 12 AWG or 3.3 mm).

POWER ON EasyTouch Wireless Control Panel (8 circuit) (P/N 520547) iS10 Spa-Side Remote Controller (P/N 520149) vi EasyTouch Pool and Spa Control System User’s Guide

How to reboot the easytouch indoor control panel?

Reinitialize the Outdoor Control Panel. Resetting the Outdoor Control Panel will not effect the system configuration settings. Right button: Press the Right button to reset system. The main screen will be displayed and communication will be established with the optional EasyTouch Indoor Control Panel if installed. Click to expand…

A terminal bar stamped is located inside the supply terminal box. To reduce the risk of electric shock, this terminal must be connected to the grounding means provided in the electric supply service panel with a continuous copper wire equivalent in size to the circuit conductors supplying this equipment (no smaller than 12 AWG or 3.3 mm).

WARNING- For units intended for use in other than single-family dwellings, a clearly labeled emergency switch shall be provided as part of the installation. The switch shall be readily accessible to the occupants and shall be installed at least 10 feet (3.05 m) away, adjacent to, and within sight of, the unit.

What should the water temp be on my Pentair?

New sensor showed a water temp of 68 degrees when the actual temp was 78 degrees. Did require resetting water temp reading in Easy Touch system (instructions in EasyTouch user manual). Repair complete.

Can a remote control be put back together?

Put the remote back together and test it. After having to wait for 3 days, you may have forgotten how all the pieces fit together. It’s not a problem, since you took a picture of the remote earlier. Refer to the picture while putting all sliding bars, loose buttons, screws, and other components back where they belong.

How does easytouch pool and spa control system work?

EasyTouch pool and spa control systems eliminate repeated trips to the equipment pad, as well as memorizing operating sequences, opening and closing valves and resetting time clocks and thermostats. Plus, EasyTouch sets the standard for operating simplicity with push-button operation and clear, intuitive instructions and displays.

How to order Pentair easytouch indoor control panel?

Requires running wire from the outdoor power center back to the indoor wall mounted controller These items are shipped from and sold by different sellers. Show details Only 2 left in stock – order soon. Ships from and sold by stores123. Only 1 left in stock – order soon. Ships from and sold by Globally Sourcing.

Can a Pentair remote work with a mobiltouch 2?

We also had to replace the “Pentair Mobiltouch 2 Transceiver Circuit Board with Integrated Antenna | 520946Z” for the remote to function, so beware if you have an older remote. If your transceiver looks like the one pictured (with detachable antenna), this remote will not work with it.

How tall is the Pentair 4 auxiliary wireless remote?

This 4 auxiliary wireless remote control is designed to use with Pentair EasyTouch pool and spa automatic control systems. Measures 22-1/2-inch length by 5-3/4-inch height by 20-1/2-inch width. Manufacturer’s warranty can be requested from customer service.

You Might Also Like