What is the best temp for a hot tub?
Personal preference Your hot tub factory settings will be at 38 degrees, but body temperature of 37 degrees is a generally good start for your hot tub. It’s regarded that women tend to like it slightly hotter at 38 – 39 degrees.
Should my hot tub dropping temperature?
You should expect this to be hot in about 20 hours. A 1.5KW heater will put about 3 degrees of heat into a spa per hour, so a typical 1/2 hour use will drop the spa temperature about 1 degree, meaning it will take about 20 minutes to recover.
What does oh ohh OHS mean in a hot tub?
OH, OHH or OHS (o verheat) all mean that a temperature sensor has detected unsafe water temperatures of 108° – 118° F, and your spa is in an emergency cool down mode. The heater is shut off, and the circulation pumps and blower are turned on to help dissipate heat.
What should the temperature be in a hot tub?
The maximum temperature of any given hot tub is almost always 104 degrees. On the other hand, most hot tubs have a minimum temperature of about 85 or 90 degrees. There are exceptions, though. Some hot tubs, such as those which use AnyTemp® spa technology, can reach temperatures as low as 62 degrees.
Is it normal for a hot tub to overheat?
That is not the case. It’s actually just the natural process of how the Arctic Spa’s designed to utilize that excess heat. So, if you’re running into this, where your spa is actually hotter than where you want it to be, keep in mind also that the spa is really designed to run at 100 degree or above.
What to do when your hot tub flashes OH or Ohh?
The heater is shut off, and the circulation pumps and blower are turned on to help dissipate heat. Open the spa cover to allow excess heat and steam to escape. The spa obviously should not be used when OH or OHH is flashing on the topside control; as the water could be scalding hot for several more minutes.
OH, OHH or OHS (o verheat) all mean that a temperature sensor has detected unsafe water temperatures of 108° – 118° F, and your spa is in an emergency cool down mode. The heater is shut off, and the circulation pumps and blower are turned on to help dissipate heat.
Now while 104 degrees is the maximum temperature for most hot tubs, it’s important to note this is probably a little too hot for most people. In fact, most people will enjoy a hot tub the most when the water is at a comfortable 100 to 102 degrees.
The heater is shut off, and the circulation pumps and blower are turned on to help dissipate heat. Open the spa cover to allow excess heat and steam to escape. The spa obviously should not be used when OH or OHH is flashing on the topside control; as the water could be scalding hot for several more minutes.
How to know if your hot tub is overheating?
Hot Tub Topside Keypad Error Codes & Messages 1 Balboa. OH = Sensors reading 112-118° F. OHH = Overheat. Spa has shut down. One sensor has detected 118° F at heater. 2 Brett Aqualine 3 CTI. OH = Overheating, water over 112° F. System will restart when temp. drops. HL = High limit switch tripped. 4 EasyPak 5 Gecko 6 Hercules 7 Hurricane 8 Hydro-Quip
