What is spa control?
Spa Pure Spa Control is a multi purpose additive that is a shock treatment, pH lock, alkalinity balance, calcium balance, clarifier and softener in one. Its compatible with all sanitizers, ozone and mineral purifiers.
How does the ThermoSpas work in standard mode?
Pressing the ‘Pump 1’ button will change the mode to Standard and display the Economy-in-Standard icon. The spa will automatically revert to Economy mode after one hour (or instantly if you press ‘Mode/Prog’). Sleep Mode heats the spa to within 20° of the temperature set-point, but only during filtration cycles.
How does the active thermal control system work?
Active Thermal Control System Architecture Most of the Station’s many systems produce waste heat, which needs to be transferred from the ISS to space to achieve thermal control and maintain components at acceptable temperatures.
How to use the timer function of a spa heater?
You can adjust the timing in hourly units. 2. You then set when your spa heater turns on, up to 24 hours in advance. This is also programmable with hourly units. For more info see our blog: Loading…
What do the warm and cool buttons do on a ThermoSpas?
Warm & Cool The warm & cool buttons are used to change the temperature set-point of the spa. When either button is pressed, “Set Temperature” is displayed on the LCD and the temperature can be adjusted. The minimum set point is 80°, while the maximum is 104°.
Pressing the ‘Pump 1’ button will change the mode to Standard and display the Economy-in-Standard icon. The spa will automatically revert to Economy mode after one hour (or instantly if you press ‘Mode/Prog’). Sleep Mode heats the spa to within 20° of the temperature set-point, but only during filtration cycles.
Warm & Cool The warm & cool buttons are used to change the temperature set-point of the spa. When either button is pressed, “Set Temperature” is displayed on the LCD and the temperature can be adjusted. The minimum set point is 80°, while the maximum is 104°.
How does a hot tub control panel work?
Control Panel Operation (for additional information, please see the Special Operating Instructions for your specific hot tub) TS702 Main Control Panel Pump 1 Pump 1 is a 2 speed pump. Pressing once puts the pump into low speed, indicated on the LCD by a slow moving pump icon .
How to turn off pump 1 on the ThermoSpas?
Pump 1 Pump 1 is a 2 speed pump. Pressing once puts the pump into low speed, indicated on the LCD by a slow moving pump icon . Pressing a second time activates Pump 1 to high speed (icon moves faster). To turn off, press a third time (icon disappears from the LCD).
