What is salt cell reversing?
As the electricity used in Salt Chlorine Generation is DC (Direct Current), scale will build up on the cell blades. The power supply will reverse the flow of electricity after a programmed amount of time to dissolve the scale off of the blades.
What does no flow mean?
The no-flow light really has nothing to do with the cell directly. There is a flow switch that makes sure water is flowing before the cell will turn on and seeing the no-flow light means that the switch isn’t seeing a flow.
Why does my Jandy pool have no flow?
An old problem has come back again. No Flow with the Jandy Aquapure Handheld and the LCD panel one green light on and no error codes which I used to get in the past. The sensor is only about a year and a half old. The Chlorine cell is about 4 years old.
When does no flow with Jandy aquapure stop?
You have to use a pen to push the little button in and it stops the pump, makes all of the lights by the buttons come on and go out then the pool starts up. It always resets the time in hand held to march 4, 2008 and noon or 1 pm.
Can a Jandy pump be used in a storable pool?
This pump is for use with permanently installed pools and may also be used with hot tubs and spas if so marked. Do not use with storable pools. A permanently installed pool is constructed in or on the ground or in a building such that it cannot be readily disassembled for storage.
Is the Jandy Pro Series fhpm pump safe?
Page 4 ENGLISHJandy Pro Series FHPM Pump ® | Installation Operation Manual SAVE THESE INSTRUCTIONS WARNING Chemical spills and fumes can weaken pool/spa equipment. Corrosion can cause filters and other equipment to fail, resulting in severe injury or property damage. Do not store pool chemicals near your equipment. CAUTION
What kind of pool equipment does Jandy use?
Build the perfect swimming pool environment with Jandy professional-grade swimming pool equipment. With a full line of pool products including pumps, filters, heaters, lights, valves, water sanitizers, and the automation solutions to control it all, Jandy has the complete pool equipment package for any pool or spa.
An old problem has come back again. No Flow with the Jandy Aquapure Handheld and the LCD panel one green light on and no error codes which I used to get in the past. The sensor is only about a year and a half old. The Chlorine cell is about 4 years old.
You have to use a pen to push the little button in and it stops the pump, makes all of the lights by the buttons come on and go out then the pool starts up. It always resets the time in hand held to march 4, 2008 and noon or 1 pm.
How do you troubleshoot a Jandy aquapure strainer?
Plug in the “flow/temp/salinity” sensor. Unclog the strainer baskets if necessary. Correctly align all valves. Clean or unclog filter if required. Plug in the “flow/temp/salinity” sensor. Remove the “flow/temp/salinity” sensor. Clean the sensor and reinstall.
