What is EC mode?
The “EC” stands for Economy mode, which in this mode does not allow the heater to heat up all the way. The Heater will only operate and Heat up to Set Temperature during the Filter Cycles.
What should pH be in hot tub?
7.2-7.8
The optimal pH range for your hot tub is 7.2-7.8.
Is there a standard or EC mode on a Cal spa?
Verified There are 3 modes in a Cal Spa. (St) Standard, (Ec) Economy and (Sl) Sleep You want it in Standard mode, so press the temp button and the light button within 3 seconds of one another and it will sequence to the next mode, repeat till you are in Standard mode. In Ec it will only heat in filter cycle
Why is my hot tub on EC mode?
In Ec it will only heat in filter cycle In Sleep mode nothing works so do not use that. That mode is for cleaning and replacing filters. Ask Your Own Pool and Spa Question
Are there any error codes for a jacuzzi?
Hence the need for a BIG LIST of CODES. The alphabetical list of hot tub error codes below covers all major manufacturers of spa controls, including ACC, Balboa, Brett Aqualine, CTI, Dream Maker, EasyPak, Gecko, Hurricane, Jacuzzi, Len Gordon, Maax, Pinnacle, Spa Builders Group, Spa Quip, Sundance and Vita Spas.
Is there a big list of Spa error codes?
Spa error codes can be somewhat cryptic, but when you have the BIG LIST of CODES, you can immediately define the two or three digit source of trouble. Problem is, there’s not much consistency among the error codes used by different spa pack manufacturers. Each company uses its own conventions for naming the various system faults.
Verified There are 3 modes in a Cal Spa. (St) Standard, (Ec) Economy and (Sl) Sleep You want it in Standard mode, so press the temp button and the light button within 3 seconds of one another and it will sequence to the next mode, repeat till you are in Standard mode. In Ec it will only heat in filter cycle
Hence the need for a BIG LIST of CODES. The alphabetical list of hot tub error codes below covers all major manufacturers of spa controls, including ACC, Balboa, Brett Aqualine, CTI, Dream Maker, EasyPak, Gecko, Hurricane, Jacuzzi, Len Gordon, Maax, Pinnacle, Spa Builders Group, Spa Quip, Sundance and Vita Spas.
In Ec it will only heat in filter cycle In Sleep mode nothing works so do not use that. That mode is for cleaning and replacing filters. Ask Your Own Pool and Spa Question
What does Th1 / 39 Mean on a hot tub keypad?
th1/39 = On startup indicates temperature probe problem. th2/current temperature = On startup indicates temperature probe problem. OH = Overheating, water over 112° F. System will restart when temp. drops. hot = Overheating, water over 112° F. System will restart when temp. drops. HL = High limit switch tripped.
