What is a VersaFlo bypass?
The VersaFlo Integrated Bypass allows for increased hydraulic efficiency when the heater is not firing. When the JXi heater is not firing, a flow gate in the bypass assembly is moved to the bypass position, allowing the water flow within the heater header to bypass the heat exchanger and return directly to the pool.
What is a Versaflo?
Powered air purifying respirators. The 3M™ Versaflo™ Powered Air Purifying Respirator (PAPR) is engineered for versatility and customization, so safety managers can build the system that works for their employees.
What does Versaflo do when the heater is not firing?
The VersaFlo Integrated Bypass allows for increased hydraulic efficiency when the heater is not firing. When the JXi heater is not firing, a flow gate in the bypass assembly is moved to the bypass position, allowing the water flow within the heater header to bypass the heat exchanger and return directly to the pool.
How to install Versaflo with a light duty wrench?
1 VersaFlo Integrated Bypass W/Wire Harness 1 2 Installation Hardware 6 3 5/16” Light Duty Wrench 1 4 Knockout Bushing 1 5 Zip Tie 4 6 Seal 1 1 2 3 4 5 6 2.1.2 4.0Required Equipment
How to install the Versaflo integrated bypass accessory kit?
This manual provides installation instructions for the VersaFlo Integrated Bypass Accessory Kit for the JXi pool and spa gas heater product line. 1.2 Technical Assistance For technical support or questions, contact your local Zodiac®distributor or Zodiac Pool Systems, Inc. at 800.822.7933 SECTION 2. Overview
How do you release the Raceway on a Versaflo heater?
3.1 Open the Heater 1. Remove the 4 screws holding the front heater panel in place to expose the raceway. See Figure 3 2. Locate the raceway lock release label on the interior of the heater raceway. 3. Using a screwdriver or comparable tool; press into the raceway release orifice until the raceway latch releases and the raceway swings free.
