What is a hot tub cover lifter?

A hot tub cover lifter helps you remove and replace your hot tub cover quickly, easily and efficiently. The cover lifter is fitted right onto the side of the hot tub. When you fold it back one more time, the cover will lift off the hot tub and stay in place.

How do I stop rain collecting on my hot tub cover?

I have several ideas how to overcome this but wondered what would be best.

overfill spa , so centre of cover sits higher than sides of spa.
float ball/float ring in centre to lift cover so water runs off.
combination of both.
move somewhere drier.

How much room do you need for a hot tub cover lifter?

approximately 18 inches
Some hot tub cover lifters place the cover vertically behind your hot tub. You’ll need approximately 18 inches of clearance behind the tub for this style lifter. Others lift the cover directly above the spa, which provides a great, space-saving solution.

Is a hot tub cover lifter worth it?

Absolutely, yes.” Here’s why: A good hot tub cover lifter is the key to extending the life of your cover and making your spa easier to use for the entire family. In addition to protecting your spa, a hot tub cover lifter also protects your back.

Do you need a hot tub cover lifter?

If you want to get the most out of your spa experience, the answer is a resounding YES! The only decision you really need to make is which cover lifter is the best for your hot tub and backyard configurations. The best idea is to ask your local hot tub professional for their advice.

How do you make a spa cover?

STEP ONE: MEASURE YOUR SPA. You know what they say, measure twice, cut once.
STEP TWO: CUT THE MATERIALS. Measure again before cutting, just to be sure.
STEP THREE: WRAP THE FOAM IN HEAVY PLASTIC.
STEP FOUR: GLUE THE FOAM TO THE WOOD BOARDS.
STEP FIVE: PAINT THE WOOD AND INSTALL THE HINGE.

Can a hot tub pump be left in the rain?

Can I leave the pump out in rain? Although the spa pumps are waterproof, if you are expecting very heavy rain we would recommend the pump unit is detached from the spa (use the stopper caps, to allow you to do this without losing the water) and bring inside.

Is there a cover lifter for a hot tub?

This hot tub cover lifter adjusts to fit most square or rectangular hot tubs and hot tub covers up to 8 feet wide. This spa cover lifter is manufactured from powder-coated steel for strength. It helps you to lift and replace your cover with ease from outside or inside your hot tub.

Where do you put the cover on a hot tub?

This is simply a shelf fixed to the back or sides of your spa where you’ll put your cover while you’re in the hot tub. Rather than lifting the cover off of the tub, a shelf removal system allows you to fold the cover over and then slide it off the hot tub and onto the shelf.

What should I do if I need to move my hot tub?

Hot tub cover. If your portable spa has a cover, it’s best to remove it now and re-attach it later than to risk damaging it during the haul. If you need to unscrew that cover, keep the screws in a safe place, preferably into a plastic bag.

How does a hot tub lifter work on a deck?

Under mount (or deck mount) lifters : lifter is attached to a metal plate that sits under your hot tub or is bolted to a deck. This avoids the need to drill holes in your tub housing.

Can you put a cover on a hot tub?

With a cover over it, the hot tub won’t be too dirty which helps to reduce the cleaning time. Plus, no debris or dirt will go in the grains, so the heater won’t be clogged. There are basically two kinds of spa cover lifters; attached lifts and detached lifts.

Can a spa cover be used as a table top?

Plus, once the folded spa cover is securely placed on the lifter arms, it can be used as a table top. When the roller is not in use, you can fold its arms snugly against the tub. Moreover, it is made using durable weatherproof materials so that your unit stays safe even in harsh weather conditions.

How is the inside of a hot tub connected?

The inside of your tub is connected to numerous internal parts of the tub through a drain. Often, it is connected to parts like hot tub pump and hot tub heater. So, if substances like dirt and debris fall into your hot tub, it would go down the train.