What happens when you push the slide out button on an RV?
If your RV or motorhome doesn’t have the juice, your slide outs aren’t going to budge! If you push your slide-out button and nothing happens, double check to make sure that the path of the slide out is unobstructed.
Why is my passenger side slide not retracting?
My trip to Baton Rouge for LSU football this past weekend went to heck when my passenger side slide would not retract (we stayed Thursday night in Lake Charles, LA to visit my son’s family). After calling a couple of Lake Charles RV repair shops, the initial thought was the slide motor had quit working.
What to do when slide outs don’t move?
Make sure the house batteries are charged completely, or if at all possible, plug your RV into shore power. This will indicate whether the problem may be the batteries or not. If you push the button for the slide outs and can hear the motor running but the slides don’t move, check the motor’s shear pins.
Why is my slide out not working on my car?
To get back home to Katy, the power supply wires to the motor were “reversed” so the slide could be retracted so I could drive home to Katy, TX. With the power supply wires “reversed”, the slide will now not extend.
Can a slide out on an RV fail?
But electrical RV slide-out systems can, and do, fail. The time to learn to troubleshoot a slide-out problem is not in a campground with a fully extended slide-out. Take the time to learn how to manually open the electric slide-out on your travel trailer. Park the trailer in an area clear of obstructions.
How do you fix a slide out motor on a travel trailer?
Reattach the brake assembly to the slide-out motor. Replace the screws and securely tighten each one with the screwdriver. The brake assembly prevents the slide-out from moving. Refer to the operator’s manual for specific instructions for the make and model of your travel trailer.
How to manually open an electric slide on a travel trailer?
Make sure the trailer is level before operating the slide-out. Check the battery and verify it is fully charged and connected to the electrical system. Press and hold the wall-mounted In/Out switch. If the slide does not extend or retract, use the manual override to extend or retract the slide-out. Find the slide-out motor.
How does a hydraulic slide out RV work?
First offered on high-end RVs with larger, heavier slide-outs, hydraulics are appearing more frequently on entry to mid-level units and may prove to be the end-all in the coming years. A hydraulic system works via a pump connected to a series of valves and lines.
What makes a slideout move in a car?
It keeps the motor locked so the gears do not move. The gearing ratio is like 50 to 1 to get the power required to move the slides and this also makes for a good breaking system to keep the slides locked in position. Rich. It is Power Gear.
What to do if your RV slide out is crooked?
Replacing the seals is an option or you can use a self leveling sealant to make sure the problem goes away and does not return. In addition to that, you may just need to go to your RV repair shop and have them replace the seal and apply the right sealant to fix the problem.
Are there any problems with the slide out on an RV?
Troubleshooting RV Slide Out Problems: One main problem with slide outs is that they may get out of alignment. The good news here is that each slide can be adjusted separately. All you have to do to fix it is take your RV to a dealer and let them make an adjustment.
What causes the slide out on a camper to bind?
Also, if your chassis is bent, that will cause your camper slide out to bind. On top of that, check the openings your slide out is going through. There may be a problem there. Check to see if you have a manual over ride option you can use just in case.
How big of a wrench do you need to move a slide?
If you disengage that lock switch you should be able to put a 3/4 inch wrench/ratchet on the nut to move the slide. If there are two motors on the slide it will require two people and the wrenches need to be turne simultaneously (slide ends within 1 to 2 inches of each other) so do the wrench turns together.
My trip to Baton Rouge for LSU football this past weekend went to heck when my passenger side slide would not retract (we stayed Thursday night in Lake Charles, LA to visit my son’s family). After calling a couple of Lake Charles RV repair shops, the initial thought was the slide motor had quit working.
Where is the slide out controller on a motorhome?
For my motorhome, there are two slide out controllers attached to the “roof” of the middle basement compartment between the two main beams of the frame. One controller for the passenger side slide-out and one for the drive side slide-out. RV Masters charged $130 for the new controller and $140 for an hour of labor to install the controller.
Why does my slide not retract after new motor?
After the new motor was installed, the slide still would not retract. The “square rods” connected to the motor were detached to assure the new motor was functioning. We found that power to the motor existed only when the “out” part of the slide’s in/out button was pushed. There was no power to the motor when the “in” side of the button was pushed.
If your RV or motorhome doesn’t have the juice, your slide outs aren’t going to budge! If you push your slide-out button and nothing happens, double check to make sure that the path of the slide out is unobstructed.
For my motorhome, there are two slide out controllers attached to the “roof” of the middle basement compartment between the two main beams of the frame. One controller for the passenger side slide-out and one for the drive side slide-out. RV Masters charged $130 for the new controller and $140 for an hour of labor to install the controller.
Make sure the house batteries are charged completely, or if at all possible, plug your RV into shore power. This will indicate whether the problem may be the batteries or not. If you push the button for the slide outs and can hear the motor running but the slides don’t move, check the motor’s shear pins.
Why is my Lippert slide out on my RV not working?
If you’re having trouble getting the Lippert slide room on your RV to budge, there are a few different things you should do in order to inspect the system and find a solution.
How often does an RV slide out on the road?
RV appliances and upgrades malfunction all the time, but if you know the proper course of action when they do, you can avoid unwanted headaches while you’re out on the road. This is certainly true of a faulty RV slide out.
What kind of gear slides are in a RV?
Most of the gear slides are either Power Gear or Lippert Components Inc (LCI) which now owns Power Gear and Kwikee as well. Some of the models have the motor directly on the gear which could be inside a compartment.
How do you move a slide out in an RV?
You will likely need to disengage the brake assembly in order to move the slide out. Look in your owner’s manual to find out the location of the manual override, brake assembly, and any tools needed. The only challenging part might be locating the brake assembly which you will likely need to disable in order to move the unit.
What causes a RV slide out not to retract?
This is certainly true of a faulty RV slide out. Stuck gears, loose cables and improper connections can cause a slide-out to extend and retract slowly or not at all. The solution to this problem is simple.
Why does my Forest River slideout not work?
The slides on some rigs (like Forest River) will not operate with the ignition or engine running. Safety issue. Other rigs are different. A friend in our chapter had this same problem that he fought for several years. His slideout operated with an electric motor driving 2 parallel rack and pinion sets from a single shaft.
RV appliances and upgrades malfunction all the time, but if you know the proper course of action when they do, you can avoid unwanted headaches while you’re out on the road. This is certainly true of a faulty RV slide out.
Are there any problems with the slide out?
Most slide out problems are not that difficult to trace and then solve. There will be those that require the help of a professional technician to repair. The key would be to get to know your system and learn when the task is beyond your abilities to handle .
Where are the rods that drive the slide out?
The opening is just to the left and below the yellow wire screw caps (first photo with old motor) Square rods that drive the slide bars are attached on both sides of the motor gear box (second photo with new motor). The slide-out that was stuck open is also shown below.
Do you need to know slide out mechanism for RV?
We don’t recommend buying or avoiding an RV because of the slide-out mechanism. Buy the RV that works for you and spend some time learning how the slide-out works. You don’t need to be an authority to understand the gist of the system; just know enough to perform visual inspections and a little light maintenance.
After the new motor was installed, the slide still would not retract. The “square rods” connected to the motor were detached to assure the new motor was functioning. We found that power to the motor existed only when the “out” part of the slide’s in/out button was pushed. There was no power to the motor when the “in” side of the button was pushed.
What happens when your slide out won’t slide out?
A stubborn slide-out, though, can turn your trip in to a disaster. Either you spend your days climbing over furniture in an attempt to live in an RV with the walls pushed in or you can’t depart for home with a slide-out that refuses to retract for road travel.
The opening is just to the left and below the yellow wire screw caps (first photo with old motor) Square rods that drive the slide bars are attached on both sides of the motor gear box (second photo with new motor). The slide-out that was stuck open is also shown below.
What kind of motor does an RV slide out use?
RV’s slideout system is operated by a 12 volt DC electric motor and you need to make sure that you supply it with enough power through a converter or a fully charged 12-volt battery. Your vehicle is leveled. You need to level your vehicle before operating the slideout. Your transit bars are removed.
What are the common problems with fifth wheel slide outs?
Each slide-out operating system has its own unique problems. Check out the following common problems with slide-outs on a fifth wheel. A faulty motor or gearbox could be the problem if your RV slide-out gear system is motor-driven. In such cases, if the motor is faulty or breaks down, then the mechanism will not work.
What causes an RV slide out to not work?
A faulty motor or gearbox could be the problem if your RV slide-out gear system is motor-driven. In such cases, if the motor is faulty or breaks down, then the mechanism will not work. If the motor-driven gearbox system is faulty, for whatever reason, your RV slide-out will not work. Your RV slide may experience resistance as it moves in and out.
How can I extend my fifth wheel slide out?
Extend your slide-outs on the fifth wheel. Use a wire brush to remove any debris, dirt, paint chippings or rust from your slide-out tracks. Clean out all the dirt and road debris from the tracks. Apply lubricant on the gears, tracks, and rails of your slide-outs. Try and retract and fully extend your slide-out a number of times.
What to do about squeaking fifth wheel slide out?
Apply lubricant on the gears, tracks, and rails of your slide-outs. Try and retract and fully extend your slide-out a number of times. At this point, the squeaking sounds should have disappeared. Lubricating your RV slide-out mechanism not only eliminates the squeaky sounds, but it also helps it work optimally.
Is the Lippert slide out controller a problem?
A final update for my slide-out problem. The good folks at RV Masters in Houston diagnosed the problem to be a “bad” Lippert Slide-Out Controller. The “in/out” switch and relay all work fine and were not the problem. A new controller was installed and the slide out is working great again!
Why are my slide outs not going in or out?
If you hear a weird noise when you try to extend the slides, it could be the pump trying to work. If you just can’t seem to make those slide outs go in or out, it is possible on most RVs to manually extend or retract the slides.
What are the colors of the slide out switch?
It makes sense that there is a relay somewhere as the wires on the back of the slide out control switches are different colors (orange “slide in” wire, blue “slide out” wire, and a common purple wire for all three switches). Somewhere the orange and purple wires at the control switch change to green and yellow wires at motor.
What does it mean when slide outs don’t slide?
This will indicate whether the problem may be the batteries or not. If you push the button for the slide outs and can hear the motor running but the slides don’t move, check the motor’s shear pins. Although it’s pretty rare, there’s a chance they could both be broken.
A final update for my slide-out problem. The good folks at RV Masters in Houston diagnosed the problem to be a “bad” Lippert Slide-Out Controller. The “in/out” switch and relay all work fine and were not the problem. A new controller was installed and the slide out is working great again!
It makes sense that there is a relay somewhere as the wires on the back of the slide out control switches are different colors (orange “slide in” wire, blue “slide out” wire, and a common purple wire for all three switches). Somewhere the orange and purple wires at the control switch change to green and yellow wires at motor.
Where can I buy Winnebago parts for my RV?
And don’t forget to check out our eBay store for great savings on a variety of different Winnebago parts! … … … … … … … …
When is the best time to order Winnebago parts?
If you do not see the product you are looking for — or if you have any questions, need help identifying your motorhome and/or parts, or would rather speak with someone before you place an order, please give us a call. Our team is available 8-5 PM Monday through Friday to assist you with your Winnebago parts needs.
Are there any problems with the Winnebago slide out?
But the most upsetting part is your Winnebago slide-out is having some issues you can’t figure out. So this kept you wondering how to solve Winnebago slide out problems?
How do you cut a slide out of a Winnebago?
First, unbox the slide-out ski. Now measure your slide’s outer side and cut the ski according to that size. Now open the sidebar of the slide. For that, you have to unscrew it and remove the tape inside. Now clean any remaining adhesive on the slide bar. It’s time to put the ski on the outer side of your slide.
Can a schwintek be used to move a Winnebago?
IMHO poor installation and poor selection of the Schwintek to move heavy slides has caused problems for Winnebago and Thor. Schwinteks do fine when moving slides that smaller, like bedroom slides. They do poorly for the large kitchen and living room slides. Those are better moved by hydraulics or larger geared electric slides.
And don’t forget to check out our eBay store for great savings on a variety of different Winnebago parts! … … … … … … … …
When to adjust slide out seal on RV?
For instance, if you have a gap on the top of your RV slide out seal, you’ll want to raise the room a little (or a lot!) to shore up that gap and prevent damaging moisture from getting into your RV’s cabin. When it comes to vertical adjustments, you can manipulate one side independently from the other.
For instance, if you have a gap on the top of your RV slide out seal, you’ll want to raise the room a little (or a lot!) to shore up that gap and prevent damaging moisture from getting into your RV’s cabin. When it comes to vertical adjustments, you can manipulate one side independently from the other.
When did the new Newmar slide outs come out?
New for motorized product in 2001, a including a voice message warning the way of the room’s movement”. wi ea Front Black @ ROOM. Front O/_H White DRIER’S KSDP. VTDP. DSDP, ATME PASS.
Do you need to replace the slide out valve?
If you do not get any power at the pump then you need to replace the switch. But if the pump is running and your slide out is not moving in, then there maybe a problem at your retract valve. If it is broken or damaged, just unscrew it and replace it with a new one.
Is the 2003 Neptune a Holiday Rambler RV?
Thanks for taking a look at the 2003 Neptune. At Holiday Rambler, we understand that great experiences on the road start with a great RV. Whatever your passions and wherever your destinations, our coaches are designed to lead you to the adventure around every corner — to let you meet the Great Outdoors on your terms, at whatever pace you choose.
What is the weight of a Neptune RV?
Gross Vehicle Weight Rating (Lbs.) 24,000 24,000 24,000 24,000 Gross Combined Weight Rating (Lbs.) 28,000 28,000 28,000 28,000 Front Gross Axle Weight Rating (Lbs.) 8,500 8,500 8,500 8,500 Rear Gross Axle Weight Rating (Lbs.) 15,500 15,500 15,500 15,500 Measurements
If you do not get any power at the pump then you need to replace the switch. But if the pump is running and your slide out is not moving in, then there maybe a problem at your retract valve. If it is broken or damaged, just unscrew it and replace it with a new one.
