What does the Sundance spa temp sensor 6600-167 do?
The Jacuzzi Spa Temp Sensor 6600-167 is a service part intended for professional repair and maintenance of both Sundance Spas and Jacuzzi hot tubs. This part does not include O-ring 6540-228 (sold separately). This part fits multiple models and years of Sundance Spas and Jacuzzi.
How do you remove sensor from Sundance Spas?
To Remove a sensor or switch wire from the sensor harness connecto r (J6), Insert the end of a paper clip into the slot corresponding with the wire to be removed. This will depress the pin tine,allowing the wire to be pulled from the harness connector.
When do you need to change the thermostat on a hot tub?
If more heat is needed to calibrate the water temperature with the thermostat, turn the calibration screw another quarter turn. Repeat as necessary until your hot tub’s water temperature matches the thermostat. If the water temperature does not satisfy the thermostat setting after calibration, you may need to replace the thermostat.
Can a bad temp sensor cause a spa to stop working?
Another issue that comes up and is an indication of a bad temp sensor is the temperature reading becomes inaccurate or the spa is going into the OH error code. If you power the spa down and power it back up it may work for a while but will do the same thing again. You need to replace the Temp Sensor.
The Jacuzzi Spa Temp Sensor 6600-167 is a service part intended for professional repair and maintenance of both Sundance Spas and Jacuzzi hot tubs. This part does not include O-ring 6540-228 (sold separately). This part fits multiple models and years of Sundance Spas and Jacuzzi.
How big is the bathtub in the Sundance spa?
The Sundance ® Certa spa has room for 5-6 bathers in a 6’9″ x 7’2″ x 36″ shell with lounge seat. It provides a mild to bold massage with 35 hydrotherapy jets, 2 high flow pumps and a Dynamic Flow circulation system.
What kind of pump does a Sundance Spa use?
See our Sundance ® Spa contol panel section or contact us if you need assistance in sourcing the correct panel for your spa. 1990s spas used 2.6HP main pump (6500-171) in the 800 series and a 1 speed or 2 speed 2HP second pump (6500-172).
Who is the owner of the Sundance spa?
Our patented Fluidix® jets were co-developed with Bowels Fluidics Corp, experts in the field of Fluid Dynamics. Discover how you can enjoy the next generation of spa ownership, making it easier than ever to use and maintain your Sundance® spa.
