What does the Norcold 1210 error code mean?

Norcold 1210 refrigerator error codes. Fault Codes. Fault Code Meaning. Corrective Actions. No display. DC voltage is unavailable to the refrigerator control panel or the refrigerator is OFF. – That the refrigerator is ON. – That the battery charging equipment of the vehicle is operational.

Why is there no cooling code on my Norcold refrigerator?

Always grab the plug head, or it could become damaged. The first time the code appears, turn the unit off and on. Norcold makes small refrigerators that are commonly found in RVs and boats. When the refrigerator is showing a “No Cooling” error code the unit must be repaired. There could be any number of reasons for the code to appear.

Is there a recall on the Norcold 1200?

This is a new recall campaign to include all 1200, 1201, 1210 and 1211 models. Even if your refrigerator was repaired as part of a previous recall, it is necessary to have it repaired again to minimize the risk of injury or death due to fire. If you have one of these refrigerator models, use the following procedure:

Why is there no co in the Norcold?

An overheating boiler not only warms the food in the fridge, it is what causes the fridge to fail. No Co INTENDED TO PREVENT FAILURE AND FIRE: Norcold’s intentions were good, but the No Co is a Band-Aid, not a solution.

What does no co mean on a Norcold refrigerator?

Occasionally the Norcold refrigerator can display an error message. The display will read “NO CO”, which probably means “Not Cooling”. It’s not a serious problem but it is a bit tricky to reset. The following procedure describes what to do if you ever see the “NO CO” error code displayed on the front of your Norcold refrigerator’s LED display.

Is the Norcold recall a false trip point?

It has been reported that the Norcold recall false trips a majority of the time. This is evidenced by the 800degF set-point stated by Norcold ( Click here to understand the need for the ARP Control & why 800F is just too hot for Norcold recall trip point ).

What are the fault codes on the Norcold refrigerator?

Norcold Fault Codes SR or S (what they … Is Your Norcold Refrigerator Doing One of the Following?N400, N410, N412, … Take the Road Less Traveled, Norcold … We’re here just in case that Norcold stops getting… well… cold.

Can a high temperature switch be installed on a Norcold?

A company by the name of ARP makes a high temperature switch that prevents overheating of the ammonia, however, their unit cannot legally be installed without the Norcold recall switch first being installed. DO NOT install the ARP without calling Norcold at 800-543-1219 and getting your current high temperature switch replaced.

Where is the jumper wire on a Norcold refrigerator?

Hold the jumper wire to the pin and ground for about 10 seconds or until you hear an audible click. If your power board was made pre 2006, you’ll find a 16 pin plug connector at the bottom of the power board (two rows of 8). On this style board, you’ll need to jump the second pin from the left hand side on the top row to ground.

Are there any Norcold de0051 parts for sale?

Norcold DE0051/ DC0051 Parts for Sale! This model refrigerator is no longer in production by Norcold. It’s replacement is the DE-0751, however, we can still get you several parts that are still in production for it! Scroll down to view the compatible Norcold DE0051/ DC0051 parts.

Where is the high temperature safety switch on a Norcold refrigerator?

The inbound DC connections are labeled on the board and usually located at the bottom right hand side of the board. If there is no power at the board, look to the right of the power board. If you have a 1200 or 1210 you should have a high temperature safety switch (a small black board).

How to troubleshoot the Norcold 121x RV refrigerator?

Norcold 121x rv refrigerator troubleshooting 1. Shut-off arm in OFF position. 1. Lower to ON position. 2. No AC power available. 2. Restore AC power. 3. Leaky water valve. 3. Replace water valve 4. Jammed ice cubes. 4. Check for bent shut-off arm 5. Mold heater open -no resistance. 5. Replace ice

Where are the DC connections on a Norcold refrigerator?

If you aren’t sure which they are, remove the power board cover so that you can see where everything connects. The inbound DC connections are labeled on the board and usually located at the bottom right hand side of the board. If there is no power at the board, look to the right of the power board.

When do Norcold fault codes appear on a refrigerator?

Norcold Fault Codes LI OP, O, or 6 flashes (potential fire hazard!) Is your refrigerator doing one of the following? These codes appear when either your high temperature limit switch has been tripped or there has been a break in the connection at LIMIT IN and LIMIT OUT on the rear power board.

What should I do if my Norcold refrigerator goes into lockout?

The next thing you’ll need to do is jumper a pin terminal on the power board to ground (we recommend something around a 12 gauge jumper wire). The refrigerator must be on and showing the fault code before you jump the pin terminal to ground. Hold the jumper wire to the pin and ground for about 10 seconds or until you hear an audible click.

Recalls on the 1200 model refrigerator date back several years and have had several revisions. Norcold is very good about getting these replaced for you at no cost.

What is the Norcold fault code for a refrigerator?

3163LG (1.8 Cubic FT.) 3163LG (1.8 Cubic FT.) Norcold Fault Codes AC HE, H, or On light flashing 3 times (What to do!) Norcold Fault Codes AC HE, H, or On light flashing 3 times (What to do!) Is Your Norcold Refrigerator Doing One of the Following? This fault code means that there is an AC Heater fault.

Where is the yellow arrow on the Norcold n611?

The yellow arrow points at the slot where the cooling unit heater access door tab is engaged. Just bend the tab to open the door.

What does no display mean on Norcold refrigerator?

No display. DC voltage is unavailable to the refrigerator control panel or the refrigerator is OFF. – That the refrigerator is ON. – That the battery charging equipment of the vehicle is operational. – That the AC/DC converter is operational (if applicable).

What does SR stand for on a Norcold refrigerator?

“AC“ “HE“ Audible alarm also. This is a fault within the refrigerator controls. This is not owner serviceable. See your dealer or authorized Norcold Service Center. “Sr“ Audible alarm also. This is a fault within the refrigerator controls. This is not owner serviceable. See your dealer or authorized Norcold Service Center. No display.

Who are the manufacturers of Norcold refrigerators?

Norcold Inc. is an American company producing refrigerators. The company produces reliable refrigerators for families and is the leader of America in production of RV gas and electric absorption refrigerators. Their refrigerators ensure years of trouble-free service.

What to do if your Norcold refrigerator goes off?

We do not recommend resetting the thermal switch until it is clear as to why it went off. We also recommend contacting Norcold direct at (800) 543-1219 to make sure you do not fall within a recall of theirs. Recalls on the 1200 model refrigerator date back several years and have had several revisions.

Recalls on the 1200 model refrigerator date back several years and have had several revisions. Norcold is very good about getting these replaced for you at no cost.

How to troubleshoot your AC / DC Norcold refrigerator?

Make sure the power switch/thermostat is not in the OFF position. Make sure that the refrigerator is correctly installed and that the vents are not blocked. Make sure that the power source to the refrigerator is serviceable. Make sure that the fuse or circuit breaker is intact (See “Over current protection system” section).

Where can I find the Norcold owner’s manual?

English Norcold Customer Support Dept. Telephone: 800-543-1219 Fax: 734-769-2332 Web Site: Owner’s Manual for the 2118X series of RV Refrigerators The letter “X”, in the model numbers above, stands for letters or numerals which means a refrigerator option. !

Where is the AC plug on a Norcold refrigerator?

The AC plug that you see in the back is only powering your AC Heater/s that will cool the refrigerator when running it on AC or Auto Mode. The 12V DC powers the rear power board, the front control board, and the interior light.

How do you reset a Norcold RV refrigerator?

Just turn the fridge off for about 3 to 5 minutes and then turn it back on again. This should reset most Norcold RV fridges. However, if there is a problem with the control panel and it is in lock-out mode or some other code, resetting it takes a lot more work, more tools, and some electrical knowledge.

What does no FL code mean on Norcold refrigerator?

The model with the F code is the N62X and it means there is no flame or it did not ignite. The Norcold 1210 model has the No Fl code and it means the exact same thing as the F code. In either case, you may hear an audible alarm go off as well letting you know there is a problem.

What are the parts for a Norcold 1200?

Your family will love the user-friendly features, the exterior beauty, and the organized and spacious interior. The following parts fit the Norcold 1200 and 1210 model refrigerators. To determine which product fits your particular model you must know the model and serial number of your RV refrigerator.

What are the 6 Norcold fault codes for Li?

Norcold Fault Codes LI OP, O, or 6 flashes (potential fire hazard!) 1 N610, N611, N810, N811 front light flashing 6 times 2 N400, N410, N412, N500, N510, N512, N621, N622, N821, N822 front display showing “O” 3 N641, N642, NX641, NXA641, N841, N842, NX841, NXA841, 1200, 1210, 1211, 2117, 2118 front display showing “LI OP”

What is the Norcold 121x-xx service manual?

This service manual provides maintenance, diagnostic, and repair information for NORCOLD ®model 121X-XX gas absorption refrigerators. The information, illustrations, and specifications contained in this publication are based on the latest product information available at the time of publication. NORCOLD ®reserves the right to make changes at

What does AC stand for on a Norcold refrigerator?

“AC“ “rE“ Audible alarm also. This is a fault within the refrigerator controls. This is not owner serviceable. See your dealer or authorized Norcold Service Center. “AC“ “HE“ Audible alarm also. This is a fault within the refrigerator controls.

How can I restart my Norcold 412 refrigerator?

One is very involved, removing lots of wires and using a jumper. Not the way an average person would like to attempt, as a wrong move could “fry” the board. The second method restarts modern boards through a series of steps on the control panel. That’s what Paul used, so we could try the refrigerator on A/C mode.

Why does my Norcold refrigerator say no fl?

How to Fix Norcold RV Refrigerator No FL Code: When you see the error code No Fl the fridge is telling you that there is no flame powering the cooling system. If you are not on the electrical option that code means the flame went out or did not light.

Why does my Norcold camper refrigerator lock out?

The problem with many of the fault codes listed in the back of our thin manuals that come with the camper is this: if you reset the refrigerator by turning it off and on, and the code reappears, the board locks out all power sources.

How to troubleshoot Norcold n621-message board-Northwood?

The 1 should change to an 8. Press the mode key until a 6 appears. Stop and an E r should begin to flash. Press the TEMP SET button until C L appears. Press the TEMP SET button until the E r returns. Turn system OFF. Turn system back ON.

How to reset a Norcold 1200lrim refrigerator control panel?

How to Reset a Norcold 1200LRIM 1 Open the refrigerator door and locate the control panel between the freezer and fresh food compartments in the refrigerator. 2 Press and hold the “On/Off” button for a few seconds and then release. 3 Wait several minutes and then press the “On/Off” button to restore power.

What kind of refrigerator is the Norcold 1200lrim?

The Norcold 1200LRIM is a 12 cubic foot in size gas-absorption refrigerator designed for use in a recreational vehicle. The unit comes equipped with an ice maker, crispers, tall bottle drawer, door bins, adjustable shelves and door latches to prevent the refrigerator from opening during travel.

How big is the Norcold n3150 refrigerator?

For further information on recommended fan install: ARP + Fan Control The N3104 is a 3.7 cubic foot fridge and the N3150 is a 5.3 cubic foot fridge. Both of these fridges are similar in the sense that they are controlled by electrical controls.

Why is the temperature number flashing on my Norcold refrigerator?

Temperature number flashes when TEMP SET button is pushed. The refrigerator is operating on the “Back Up Operating System”. This is a fault within the refrigerator controls. This is a fault within the refrigerator controls. This is a fault within the refrigerator controls.

Is there a fault on the Norcold N7?

This fault seems to have plagued many of these new Norcold models and unfortunately it often times comes down to replacing either the front optical board or the rear power board.

Why does my Norcold refrigerator say back up operating system?

The refrigerator is operating on the “Back Up Operating System”. This is a fault within the refrigerator controls. This is a fault within the refrigerator controls. This is a fault within the refrigerator controls. This is not owner serviceable.

What does a fault code on a refrigerator mean?

Fault Codes. Fault Code Meaning. Corrective Actions. No display. DC voltage is unavailable to the refrigerator control panel or the refrigerator is OFF. – That the refrigerator is ON. – That the battery charging equipment of the vehicle is operational.

How do I reset Norcold when no co flashes?

In order to reset Norcold fridges when the No Co code flashes one has to take off the cover of the fridge controller. The first time the “no co” fault code appears on the optical control assembly, it can be cleared by the user by turning the refrigerator OFF and then back ON.

What happens if you bypass the Norcold recall?

As a result of false triggers for the Norcold recall, operators get into the habit of resetting or bypassing the Norcold recall. This is a bad habit, if there is a failure of the fridge and one bypasses the recall, or turns off the ARP Control, a dangerous situation may occur.

Where can I find Norcold owner’s manual in English?

NORCOLD, Inc. P.O. Box 4248 Sidney, OH 45365-4248 Part No. 639301B (6/4/2018) English Owner’s Manual FIRE OR EXPLOSION HAZARD If you smell gas or ammonia: 1. Open Windows 2. Do not attempt to light appliance. 3. Do not touch electrical switches. 4. Extinguish any open flame. 5. Shut off fuel supply. 6.

Is the Norcold 900 door hinge pin Universal?

This model is no longer in production, however, many parts are still in production that work with this model as well as newer model refrigerators. The board listed below is a universal board to fit the 900 and 9100 models. Norcold Door Hinge Pin 618145 (fits most models!)

What kind of power does a Norcold refrigerator use?

Norcold gas absorption refrigerators operate off of 12V DC power (battery power). The AC plug that you see in the back is only powering your AC Heater/s that will cool the refrigerator when running it on AC or Auto Mode. The 12V DC powers the rear power board, the front control board, and the interior light.

Where is the thermal switch on a Norcold refrigerator?

If you have an N611, N621, N641, NX641, NXA641, N811, N821, N822, N841, NX841, NXA841, or N1095, you may have a thermal switch located at the flu. Simply follow the two lines coming from your 12V DC + and – terminals on the board to the right. You may have a push button switch that has gone off.

What’s the 2 way operation on a Norcold refrigerator?

2-way Operation: AC/Gas (old style). Short cable to the ignitor board. 3-way Operation: AC/DC/Gas (old style). Short cable to the ignitor board. The Factory recall must be done! * See Note! The Factory recall must be done!

Where is the second pin on a Norcold board?

On this style board, you’ll need to jump the second pin from the left hand side on the top row to ground. It will be an empty slot. If this board does not resemble the one you have on your refrigerator, you have the newer style Norcold board.

How long does it take for a Norcold refrigerator to cool?

After connecting it to 12 volts the refrigerator took a while to cool but ran continuously until it got into the low 30s. The next day the refrigerator started short cycling and the temperature would fluctuate. It would run for about 2 minutes then shut off for two or three seconds and then restart.

Can a Norcold refrigerator be used in an RV?

Most RV’s have gas absorption refrigerators and these can be more troublesome since there are more components that affect the cooling. The first thing to know is that the cooling units on every Norcold gas absorption refrigerator are gravity operated and MUST be level in order to run properly.

What are the fault codes for Norcold refrigerators?

Norcold N7/ N8/ N10 Fault Codes And What To Do (service manual … Is Your Norcold A Right or Left Hand Door … The Norcold Guy is about to explain an age old question… How do … Norcold Refrigerator Ventilation (how … How important is the ventilation in the back of your refrigerator, you … What Causes Norcold Cooling Unit Failures?

What’s the No FL code on a Norcold?

Na8lx.3r my dad has one in his rv just got installed and it has the no FL code. He followed the steps of having it on auto ac mode and unplugging the ac outlet however there was no spark from the igniter and it doesnt seem theres any gas.

When to look for a Norcold fault code?

If the refrigerator has tried to operate on gas or LP mode and is not sensing the flame, this code will appear. The first thing you should do is take a look at the burner during the ignition cycle.

How to reset the N code on a Norcold refrigerator?

“Reseting N code on Norcold Refrigerators Turn system ON. When “n” code appears: Press and hold the MODE and TEMP SET buttons together. Release them when a 1 appears. The 1 should change to an 8. Press the mode key until a 6 appears. Stop and an E r should begin to flash. Press the TEMP SET button until C L appears.

Can a fridge defend be installed on a Norcold?

This page shows how to install the Fridge Defend on Norcold Models 962, 982, 9162, 9182, 963, 983, 9163, 9183 and provides troubleshooting information. Before reading this page, please click here and view our wiring video.

Where can I find the Norcold service manual?

We have moved our Norcold Service Manual Specifications and Fault Codes to the installation pages, please select your model below.

What does no AC alarm mean on Norcold refrigerator?

“no“ “AC“ Audible alarm also. AC voltage is unavailable to the refrigerator control. – That the refrigerator plugged into a serviceable outlet. – That the fuse or circuit breaker of the vehicle is intact. – That the vehicle generator is operational (if applicable).

What causes a Norcold cooling unit to fail?

Problems arise when the cooling unit is overheated, usually by off-level operation. This overheating of the ammonia solution actually changes the chemical composition, breaking down the anti-corrosion chemicals and causing thermal stress in the cooling units boiler.

Is the Norcold gas absorption model refrigerator safe?

Nearly everyone with a Norcold RV refrigerator has heard of the dreaded high temperature sensor recall. Is your refrigerator safe?! Norcold gas absorption model refrigerators (RV models) have cooling units that operate through the heating, evaporating, and condensing of an ammonia solution.

What kind of power does a 1210 AC refrigerator use?

The 1210 AC series cools only on AC power. These refrigerators electronic controls operate on 12 volt DC. Model Letter Codes

Are there diagnostic codes for a RV refrigerator?

Along with RV refrigerator troubleshooting tips for solving basic issues, many modern appliance makers include in a model’s service manual a list of diagnostic codes specific to that model. With these codes, you can return from a day trip or awake from a nice night’s sleep and learn how your fridge has been operating during that period of time.

The 1210 AC series cools only on AC power. These refrigerators electronic controls operate on 12 volt DC. Model Letter Codes

Why does my Refrigerator not have a fault code?

All LP components could be the cause of this code. If the refrigerator has tried to operate on gas or LP mode and is not sensing the flame, this code will appear. The first thing you should do is take a look at the burner during the ignition cycle.

What kind of refrigerator is a Norcold model?

Your Norcold refrigerator is either a gas absorption model or an AC/ DC model refrigerator. Gas absorption models have coils on the back (the cooling unit) and are capable of operating on LP/ propane. AC/ DC models have a compressor and do not have an LP/ propane mode of operation.

Where is the plug on the Norcold ice maker?

The ice maker is mounted with two screws that you can get to at the top, securing it to the back wall of the freezer box. Once the screws have been removed, there is a plug connector that needs to be disconnected as well as the water line connection. Both are easily accessible once you’ve removed the mounting screws.

Is it possible to replace the Norcold 1210 refrigerator?

Glad to hear of your success with replacing the Norcold 1210. We too have an ongoing saga of dissatifaction with ours. The history is one of having Allegro in Red Bay check and reset the doors and gasket seals as the first attempt to get the fridge to cool down.

Where to find Norcold power board model 628661?

To determine which product fits your particular model you must know the model and serial number of your RV refrigerator. This can be found inside your refrigerator on the right-hand side on a manufacturers label. Norcold Power Board 628661 (new style board fits most models!)

We have moved our Norcold Service Manual Specifications and Fault Codes to the installation pages, please select your model below.

How do you reset a Norcold 1200lrim freezer?

Resetting the unit is fairly simple. Open the refrigerator door and locate the control panel between the freezer and fresh food compartments in the refrigerator. Press and hold the “On/Off” button for a few seconds and then release. Wait several minutes and then press the “On/Off” button to restore power. This will reset the refrigerator.

What does flashing number mean on Norcold RV refrigerator?

Norcold RV Refrigerator Gas Check if Flashing On the 1210 we only found that if the temperature setting is flashing when the temp set button is pushed then the flashing number tells you that it is on the backup system. When you see that number flashing, it is telling you that you can’t fix it and you need to go to a repairman.

How to turn off mode on Norcold N621?

Press the mode key until a 6 appears. Stop and an E r should begin to flash. Press the TEMP SET button until C L appears. Press the TEMP SET button until the E r returns. Turn system OFF. Turn system back ON.

Where can I find the Norcold N811 and N821?

Welcome to our Fridge Defend installation and Norcold N811, N820, N821, N823, N841, N842, NX811, NX841, NXA811, & NXA841 troubleshooting page. Before reading this page, please click here and view our wiring video.

What does Norcold code on light flashing 3 times mean?

Norcold Fault Codes AC HE, H, or On light flashing 3 times (What to do!) Norcold Fault Codes AC HE, H, or On light flashing 3 times (What to do!) Is Your Norcold Refrigerator Doing One of the Following? This fault code means that there is an AC Heater fault.

Why is my Norcold refrigerator flashing 10 times?

While Norcold can’t pinpoint the fault any further than that we can tell you that based on the Norcold refrigerators we’ve work on with this code, it’s typically the power board that is to blame and so we recommend starting there.

If it’s showing one of these three codes, it’s simply in lockout mode and your refrigerator needs to be reset and diagnosed: “NO CO” – These models will show this code: 1200, 1210, N841, N641 “n” – These models will show this code: N621, N821 “if your light is flashing 5 times repeatedly” – These models will show this fault: N811, N611, N510, N410

Why does my Norcold refrigerator keep flashing fault codes?

If it’s showing one of these three codes, it’s simply in lockout mode and your refrigerator needs to be reset and diagnosed: Your Norcold refrigerator will show this code if it’s not sensing a temperature drop while in operation. This is actually a safety precaution!

How many cubic feet does a Norcold refrigerator hold?

Storage Volume: This refrigerator is made for storage of foods and frozen food and for making ice. Total capacity N7 models – 6.5 cubic feet N8 models – 7.6 cubic feet Leveling: The refrigerator is made to operate within 3° off level side-to-side and 6° off level front-to-back (as looking at the front of the refrigerator).

What does the Norcold manual say about pm?

Hi Brett, the manual I have, (which is a section in a large manual covering most of the RV systems), mentions the PM you talk about, they tell you to do a list of things, but no instructions on how to do them or good diagrams on where to find the given parts. In fact, they say to have a dealer or Norcold Service Center do it.

What’s the issue with the Norcold n611rt refrigerator?

My issue is with the NORCOLD N611RT refrigerator. Everything was working perfect when plugged into power at home as well as when using the generator. We took it out for a weekend to a campground close to home and were plugged into the 50amp service at the site.

Where to find Norcold cooling unit serial number?

The following parts fit the Norcold N600 model refrigerators. To determine which product fits your particular model you must know the model and serial number of your RV refrigerator. This can be found inside your refrigerator on the right-hand side on a manufacturers label. Norcold Cooling Unit Fan Kit 619020 (fits several models!)

Where is the trouble code for limp mode?

Because of this, every time when the limp mode is active, there will be a stored trouble code in the trouble code memory. Therefore, the best solution to fix the limp mode without replacing the wrong parts is to find out which this trouble code is.

When do I see the Li op code?

front display showing “LI OP” These codes appear when either your high temperature limit switch has been tripped or there has been a break in the connection at LIMIT IN and LIMIT OUT on the rear power board. The first thing we would recommend you do is to take a look at your power board by removing the power board cover.

What does liop stand for as an abbreviation?

What does LIOP mean as an abbreviation? 4 popular meanings of LIOP abbreviation: All Acronyms. 2021. LIOP. Retrieved May 21, 2021, from All Acronyms. 2021.

What is the service manual for a Norcold refrigerator?

SERVICE MANUAL 121X Series Gas/Electric Refrigerators This page intentionally left blank Se c toi n11 This service manual provides maintenance, diagnostic, and repair information for NORCOLD ®model 121X-XX gas absorption refrigerators. The information, illustrations, and specifications contained in this

Where is the 5Amp fuse on the Norcold 1210t?

Just before taking it out for the 4th, we powered on the unit the night before using shore power. The following morning we find the refrigerator without power. Mains and breakers were fine. There happens to be another 5amp fuse on the control board at the rear access panel.

How to light a Norcold gas and electric refrigerator?

How do I Light a Norcold Gas & Electric Refrigerator? One of the most popular RV refrigerators is the Norcold model, made by the Thetford Corp. This refrigerator uses either propane gas or electricity for power.

What’s the temperature of a Dometic Norcold refrigerator?

Even Dometic and Norcolds recalls have not stopped their refrigerators from burning an RV to the ground. The temperatures they are trying to control run around 355 to 400 degrees. Those are the temperatures involved in these absorption fridges!

How to identify the model of your Norcold refrigerator?

To identify which model refrigerator you have, look for the serial plate in one of the three locations noted below. Besides the model number, you will find the serial number, which is necessary when contacting Norcold about your refrigerator. Serial Plate location prior to January 1984. Serial Plate location between January 1984 and April 30, 1995.

Are there any Norcold freezer compartment parts for sale?

Norcold N300/ N302 Refrigerator Parts and Products for Sale! This unit makes the most of 2.7 cubic feet. The freezer compartment is perfect for ice cubes or frozen treats, and the top manual controls are easy to operate. The following parts fit the Norcold N300/ N302 model refrigerators.

Is there a recall on Norcold refrigerator N305?

Click here to see if a N305 or N306 serial number falls under this recall or check the status of a recalled unit. Click here for the Service Bulletin with detailed instructions how to access and tighten the unused connection on the propane gas valve on these refrigerators.

Is there a charge for a Norcold recall?

Total time allowance for the required recall service is 0.5 hours. All labor to inspect and tighten the unused connection on the propane gas valve is at no charge to the consumer. You will be reimbursed for the appropriate time at your standard labor rate. Here is the Claim Form.

Why is the Norcold fault code flashing 5 times?

This is actually a safety precaution! If it continues to run while the ammonia solution inside the cooling unit is not flowing through the system it can cause a fire. Make no mistake, if the refrigerator is not cooling then there is certainly a probem with the ammonia solution flowing through your cooling unit.