What does the International Residential Code apply to?
In Summary The International Residential Code (IRC) applies to detached one-and-two family dwellings and townhouses not more than three stories above grade plane in height with a separate means of egress and their accessory structures not more than three stories above grade plane in height.
When should I use Iebc?
The 2018 edition of the International Building Code (IBC) requires the use of the International Existing Building Code (IEBC) when a project intends to modify an existing building. This includes repairs, alterations, relocation of buildings, additions and change of occupancy.
Where are plumbing fixtures required in International Building Code?
Fixtures located within family or assisted-use toilet and bathing rooms required by Section 1109.2.1 of the International Building Code are permitted to be included in the number of required fixtures for either the male or female occupants in assembly and mercantile occupancies. 403.2 Separate facilities.
What kind of plumbing code do you need in Colorado?
The International Plumbing Code (IPC), the International Residential Code (IRC), and the International Fuel Gas Code (IFGC) are the adopted codes used by the State of Colorado. Plumbing installations must comply with IPC, IRC, and IFGC requirements. The state currently employs’ inspectors who inspect in 27 counties throughout Colorado.
How is minimum number of plumbing fixtures determined?
403.1 Minimum number of fixtures. Plumbing fixtures shall be provided in the minimum number as shown in Table 403.1, based on the actual use of the building or space. Uses not shown in Table 403.1 shall be considered individually by the code official. The number of occupants shall be determined by the International Building Code.
What is the International Plumbing Code section 403.4?
403.4 Signage. Required public facilities shall be provided with signs that designate the sex, as required by Section 403.2. Signs shall be readily visible and located near the entrance to each toilet facility. Signs for accessible toilet facilities shall comply with Section 1111 of the International Building Code.
Fixtures located within family or assisted-use toilet and bathing rooms required by Section 1109.2.1 of the International Building Code are permitted to be included in the number of required fixtures for either the male or female occupants in assembly and mercantile occupancies. 403.2 Separate facilities.
What do you need to know about plumbing code?
Additional fixtures for washing, bathing and culinary purposes are also necessary where occupants dwell in buildings. Chapter 4 specifies the minimum number and type of plumbing fixtures for buildings based on the description of use of the building.
What is the International Code for a water heater?
Elevation of water heater ignition sources and mechanical damage protection requirements for water heaters shall be in accordance with the International Mechanical Code and the International Fuel Gas Code. 502.2 Rooms used as a plenum.
403.4 Signage. Required public facilities shall be provided with signs that designate the sex, as required by Section 403.2. Signs shall be readily visible and located near the entrance to each toilet facility. Signs for accessible toilet facilities shall comply with Section 1111 of the International Building Code.
