What does the Inncom E7 EMS thermostat do?
The new INNCOM e7 EMS Thermostat is a direct digital control programmable thermostat that provides comfort and reduces guestroom HVAC energy costs. An INNCOM Networked EMS delivers 25-40% guestroom HVAC energy savings.* This next generation thermostat offers simple solutions that reduce complexity in most HVAC applications.
How many hotel rooms have Inncom thermostats?
Over the past 25+ years, hotel owners have trusted INNCOM technology to deliver comfort, energy savings and peace of mind in more than 1.5 million hotel rooms around the world.
Are there any warranties on a Honeywell thermostat?
Honeywell makes no representations or warranties with respect to this document. In no event shall Honeywell be liable for technical or editorial omissions or mistakes in this document, nor shall it be liable for any damages, direct or incidental, arising out of or related to the use of this document.
How big should inductive loads be on a thermostat?
Keep wiring and controllers at least six feet from large inductive loads (power distribution panels, lighting ballasts, motors, etc.). Failure to follow these guidelines can introduce electrical interference and cause the system to operate erratically.
What does an error code EI mean on a thermostat?
System will shut down. Loss of communication between the CCC 2 thermostat and an individual system power module board. The LED will display error code EI and the zone num- ber that lost communication. Any additional zones that loose communication will blink in addition to the current zone. Open circuit or out-of-range indoor temperature sensor.
Is the Inncom E7 thermostat Class A?
This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
When do I get an error code on my Dometic thermostat?
When the system determines that one of the faults listed below has occurred an error code will be displayed in the LCD. Loss of communication between the CCC 2 thermostat and all system power module boards. System will shut down. Loss of communication between the CCC 2 thermostat and an individual system power module board.
What to do if your Mitsubishi thermostat says EO?
1) Check the transmission wire. 2) Signal transmitting/receiving circuit is abnormal. 2) Check with another remote controller. If “EO” is still indicated, replace the indoor controller board. If other check code appears, replace the original remote controller. 1) Check the thermistor. 2) Measure the resistance of the thermistor.
