What does the Clean button do on a hot tub?
When you hit the “Jets” button on a HotSpring Spa, the jet pump will run on high speed for 2 hours and then shut off. When you hit the “Clean” button, the jet pump will run on high speed for 10 minutes and then shut off.
What to do if your spa heater does not turn on?
Turn on your spa and observe its operation. If you do not have power to the spa, you may have a tripped breaker panel switch or GFCI outlet. Flip the breaker panel switch on or press the reset button on the GFCI outlet to restore power. Turn the spa on.
Where is the high limit reset button on a spa heater?
This is a red button found on many spa packs. It may be located on the heater and covered by a rubber nipple. Press the high-limit reset button. When this button is tripped, it will “click” in when you reset it. Turn on your spa and observe its operation.
How can I Reset my Digital spa heater?
A digital spa pack may not have a manual high-temperature reset switch. This is controlled by a sensor instead. If the heater element is not getting the proper amount of water flow due to pump problems or poor water level, the sensor will trip the heater and cause it to stop operating. Check the spa’s water flow for pump operation.
When do I need to reset my hot tub heater?
A spa heater has a high-limit reset button. A spa or hot tub provides a form of personal relaxation known as hydrotherapy. The spa’s pump and heater provide a soothing environment by circulating water through jets and increasing it to the bather’s desired temperature. A spa heater may need to be reset if it has tripped or stopped working.
What happens to the temperature of a spa?
Spa will only heat during filter period. Temperature will remain close to desired, but it will drop between filter periods. If users can get in a routine, filter period should overlap the usage time by a half hour. This will have spa temperature closest to the desired temperature.
When to turn off the heater in a spa?
The Hi-Limit shuts off the heater or spa equipment when it detects a water temperature of 109° – 116°. The Hi-Limit on most newer spas can be reset by turning off the spa’s main power supply, and allowing the water to cool to below 100°.
When to contact an expert for a hot tub repair?
We recommend contacting an expert technician when repairs require professional attention, especially during the warranty period—you don’t want to risk voiding your warranty. Your Hot Spring hot tub offers incredible benefits for stress and tension relief, hydrotherapy, and personal connections.
What to do when your hot tub is not in use?
Always keep your hot tub covered when not in use to keep debris out and to more efficiently maintain water temperature. Keep detergents and soaps out of your spa by showering with water only before getting into the hot tub.
