What does PR mean on my Viking Spa?

What does PR mean on my Viking Spa?

Priming mode
Legend, Heritage & Tradition) INITIAL START-UP. When your spa is first activated, it will go into Priming mode, indicat- ed by “Pr”. The priming mode will last for less than 5 minutes. Then, the spa will begin to heat and maintain the water temperature in the Standard mode indicated by “St”.

How do you winterize a Viking Spa?

10 Steps to Winterize Your Hot Tub

1. Turn Off The GFCI Circuit Breaker.
2. Remove Your Hot Tub’s Side Panel.
3. Attach A Garden Hose To The Drain Hose.
4. Loosen Unions On The Heater And Pumps.
5. Remove The Drain Plug From The Pumps.
6. Use A Wet-Vac To Remove Water From The Lines.
7. Replace Drain Plug On Pumps.
8. Add Hot Tub Antifreeze.

How many Viking hot tubs does Viking Spa have?

The Viking Spa Company is an original hot tub company that is a family run. The Viking Spas line consists of eight molds that can be made up in three different ways to hit each price range and hydrotherapy need. This limited line of tubs makes it easier for Viking Spas to stay competitive and keep up their quality.

What kind of temperature sensor does Nordic Spa use?

Nordic spa sensor part 074244 is a hi limit sensor for S-Class controls used in Nordic hot tubs. We also offer the temperature sensor 070008 if needed. 960090-000 is a Water Level sensor that senses water through tub wall.

Why does my Spa have an error code SN?

Here’s a Cal Spa troubleshooting chart for when your spa topside display shows a sensor error code Sn, Sn1, Sn2, Sn3… As you can see, it could be a nuisance tripping, or the wires could be absorbing excess heat, need calibration, or simply be faulty.

What does SN stand for in a hot tub?

Continuing in my little series on spa and hot tub error codes or trouble codes, today we take a look at Sensor Errors. These will present themselves in many forms on the display, such as Sn, Sn1, Sn2, and they refer to temperature sensors located on the heater manifold.

The Viking Spa Company is an original hot tub company that is a family run. The Viking Spas line consists of eight molds that can be made up in three different ways to hit each price range and hydrotherapy need. This limited line of tubs makes it easier for Viking Spas to stay competitive and keep up their quality.

Here’s a Cal Spa troubleshooting chart for when your spa topside display shows a sensor error code Sn, Sn1, Sn2, Sn3… As you can see, it could be a nuisance tripping, or the wires could be absorbing excess heat, need calibration, or simply be faulty.

Continuing in my little series on spa and hot tub error codes or trouble codes, today we take a look at Sensor Errors. These will present themselves in many forms on the display, such as Sn, Sn1, Sn2, and they refer to temperature sensors located on the heater manifold.

How big does a Viking water pump need to be?

A wire connector is provided on this unit to connect a minimum No. 8 AWG (8.4mm2) solid copper conductor between this unit and any metal equipment, metal water pipe or conduit within 5 feet (1.5m) of the unit. 3. DANGER: Risk of Injury. The suction fittings in this spa are sized to match the specific water flow created by the pump.