What does OH mean on hot tub?
overheat
OH, OHH or OHS (overheat) all mean that a temperature sensor has detected unsafe water temperatures of 108° – 118° F, and your spa is in an emergency cool down mode. The heater is shut off, and the circulation pumps and blower are turned on to help dissipate heat.
Why are there error messages on my artesian hot tub?
Some of these can indicate that you have a fault. Others will display operational messages to ensure optimal usage of the hot tub. There are six different ranges within Artesian Spa. They may display different codes. These ranges are: Download the full owner’s manuals here.
Where do I Register my artesian hot tub?
WARRANTY REGISTRATION Please activate your warranty and register your spa at click SUPPORT then “Click Here to Register Your Spa” or mail the registration card in the back of the Owner’s Manual.
Are there error codes for digital hot tubs?
The best thing about digital spas and hot tubs – those with a spa side control panel – is that you are given error codes for most equipment problems. Spa error codes can be somewhat cryptic, but when you have the BIG LIST of CODES, you can immediately define the two or three digit source of trouble.
What does it mean when water temp is high on Artesian spa?
This is not an error indication but an operational message. Means the spa system has detected that the water temp is 110°F (43.3°C) or more, thus disabling spa functions. Once the spa water temperature is below 108°F (42.2°C), the system will auto reset. Conduct verification checks for high ambient temperatures and also extended pump operation.
Some of these can indicate that you have a fault. Others will display operational messages to ensure optimal usage of the hot tub. There are six different ranges within Artesian Spa. They may display different codes. These ranges are: Download the full owner’s manuals here.
What should water temp be for artesian hot tub?
In some cases pumps and heaters may turn on and off. A water temp of 43.3 or more has been detected. Spa systems disabled. System will re-set once the temp is below 42.4 degrees. Check for extended pump operation or high ambient temperature. Fill the hot tub up. Pumps and heater will stop when this shows.
The best thing about digital spas and hot tubs – those with a spa side control panel – is that you are given error codes for most equipment problems. Spa error codes can be somewhat cryptic, but when you have the BIG LIST of CODES, you can immediately define the two or three digit source of trouble.
How can I reset the temperature on my artesian spa?
Message that can be reset will appear with a “right arrow” at the end of the message. This message can be selected by navigating to it and pressing the select button. Means that the temperature of the water is unknown.
