What does no cell power mean?
‘No Cell Power’ means the current chlorinator cycle has been interrupted due to no voltage being detected when the cell power relay was turned on.
What is the default display on Aqua logic?
Turn power on at the main panel and turn the Aqua Logic control power circuit breaker on. The keypad will show the default display. The default display alternates between the day/time, air and pool (or spa) temperature, pool/spa sanitizer setting, and salt level.
When did the no cell power message Come On my Aqua logic P4?
This controller serves to control the electrical systems of the pool- generating chlorine and the filter. The controller was warranted for 3 years so it expired in March 2009- (less than 3 months ago). On Saturday June 20th I discovered a “No Cell Power” message on my Aqua Logic P4.
What does no cell power on Hayward AquaLogic mean?
My diagnostic message began as “low temp” with my water at 80 degrees F, then after resetting many times by cycling the power my diagnostics said “Check Salt Level” and my true salt level was 3200PPM. So I suggest anyone whos cell will not click on check the K1 joint. Easy fix. You are the man, this was brilliant!
When did I replace the cell on my AquaLogic pool?
My AquaLogic control panel looks a little different than the one in your pictures but the PCB looks similar – including the bad connection on K1. Mine was installed with the pool back in November 2003. I’ve had to replace the cell back in May of 2006 (just inside the warranty).
Turn power on at the main panel and turn the Aqua Logic control power circuit breaker on. The keypad will show the default display. The default display alternates between the day/time, air and pool (or spa) temperature, pool/spa sanitizer setting, and salt level.
This controller serves to control the electrical systems of the pool- generating chlorine and the filter. The controller was warranted for 3 years so it expired in March 2009- (less than 3 months ago). On Saturday June 20th I discovered a “No Cell Power” message on my Aqua Logic P4.
When did no cell power start on Hayward AquaLogic?
In March of 2009 my Hayward Aqualogic pool system started displaying the message “No Cell Power” and the salt system in my pool was no longer working. This website details the steps involved in correcting this error.
Why is the salt level on my Aqua logic so low?
Looked at the control panel For my Hayward Aqua Logic AQL-P-4 shows low salt. I just added a bunch of salt about a month ago and it was working fine.
