What does it mean when salt water pool says no flow?
The most common reason for low or no flow is that the baskets are full of debris. By checking and emptying both the skimmer basket (by the pool) and the pump basket (inside the pump) this will free up the water flow, allowing the system to fully ‘prime’ and function at full capacity.
Why is the No Flow light on Hayward salt generator?
“No Flow” LED illuminated. The Hayward Aqua Rite has sensed a no flow condition and has stopped generating chlorine. Check that the flow switch is plugged into the connector on the bottom of the control unit and that the wire is not cut or damaged.
Should you shock a salt water pool?
Should you add shock to a salt water pool? It’s absolutely okay to shock your salt water pool, and is actually pretty important! Running your pool’s super-chlorinate feature too often is hard on the motor and will cause it to wear out faster.
Why is the no flow light still on in my Pool?
Tried rinsing it with water, to no avail; cleaned with a water/HCl solution, and the light is still on. I have read that when the cell is placed in the acid solution, it should ‘bubble’ for a few seconds, but I didn’t see any bubbling at all.
What do you need to know about a saltwater pool?
1. Test and Adjust Salt Concentration (Salinity) A saltwater pool system will operate efficiently only when salt is in the right concentration. Different chlorine generators will need different salinity levels, and this is the first thing you need to take in consideration before adding or reducing salt in your pool.
What causes low free chlorine in a salt water pool?
Apart from low salinity levels, low free chlorine can be caused by Calcium buildup on the salt cell, An expired cell, Excess stabilizer (cyanuric acid), or Poor circulation.
What happens when you switch to salt water swimming pool?
Once people switch to salt, people get enthusiastic about how easy & cost-effective it is, as well as how much nicer the water is (its softer and gentler on the body). So, when people that use salt pool systems tell their friends how much they love it, one interesting side effect is that it can create some misconceptions.
What does the low salt light mean on a pool?
If the “Low Salt” light is flashing red, then the sensor is calculating the salt to be between 2,600 and 2,800 ppm and it wants you to add salt, but it should continue to work. If the Cell light is solid green, then it is working.
Is the no flow light always on in a pool?
The NO FLOW LIGHT is always on and most of time also cell reversing light. There are no error codes. Today pool company said the cell may be bad. I called handy to get info and they said possibly its a bad sensor.
What happens when you put salt in your pool?
Note: Salt Brushing the salt around will speed up the dissolving process. Do not allow the salt to sit in a pile at the bottom of the pool. Salt water is heavier than fresh water so the salt water will tend to accumulate at the deepest part of the pool.
What happens when the low salt light flashes?
If the “Low Salt” light is solid red, then the sensor is calculating the salt to be below 2,600 and it will turn the cell off. If the “Cell” light is flashing, or off, then the cell is off. The “Cell” light should flash if the cell needs cleaning. It wouldn’t hurt to check it anyway. What are all of your chemical levels?
