What does ICE mean on hot tub?
When filling* your hot tub in cold conditions a warning message ‘IC’ or ‘ICE’ may appear. This is to inform you that the water temperature is below 7.2°C (45°F) and open to the risk of freezing.
Are ThermoSpas good?
ThermoSpas scores highly across online consumer reviews. ThermoSpas is a ConsumerAffairs accredited company, where customer reviews result in a 4.1 out of 5-star rating. Consumer opinion on My3Cents averages out to 4.4 out of 5.
How to turn off pump 1 on the ThermoSpas?
Pump 1 Pump 1 is a 2 speed pump. Pressing once puts the pump into low speed, indicated on the LCD by a slow moving pump icon . Pressing a second time activates Pump 1 to high speed (icon moves faster). To turn off, press a third time (icon disappears from the LCD).
Why does my Master Spa circ pump keep running?
If the tubing from the button to the motor develops a leak while it’s on you can’t shut it off and vis-versa. Master Spas come programmed to run the circ pump 24 hours. Is this a new issue? The ‘circ pump’ is the small pump that runs the heater and has a dedicated return.
How does the ThermoSpas work in standard mode?
Pressing the ‘Pump 1’ button will change the mode to Standard and display the Economy-in-Standard icon. The spa will automatically revert to Economy mode after one hour (or instantly if you press ‘Mode/Prog’). Sleep Mode heats the spa to within 20° of the temperature set-point, but only during filtration cycles.
How do I change the spa to standard?
The Economy icon will be displayed unless the mode is changed. Pressing the ‘Pump 1’ button will change the mode to Standard and display the Economy-in-Standard icon. The spa will automatically revert to Economy mode after one hour (or instantly if you press ‘Mode/Prog’).
Pump 1 Pump 1 is a 2 speed pump. Pressing once puts the pump into low speed, indicated on the LCD by a slow moving pump icon . Pressing a second time activates Pump 1 to high speed (icon moves faster). To turn off, press a third time (icon disappears from the LCD).
When did ThermoSpas start making hot tubs?
ThermoSpas began manufacturing spas in 1983 and launched the direct to the consumer spa business in 1995. ThermoSpas corporate headquarters is proudly located in the US and has full-time employees across the country. Too Much Chlorine in Your Hot Tub? Here’s How to Fix It
Is it normal for a hot tub to overheat?
That is not the case. It’s actually just the natural process of how the Arctic Spa’s designed to utilize that excess heat. So, if you’re running into this, where your spa is actually hotter than where you want it to be, keep in mind also that the spa is really designed to run at 100 degree or above.
If the tubing from the button to the motor develops a leak while it’s on you can’t shut it off and vis-versa. Master Spas come programmed to run the circ pump 24 hours. Is this a new issue? The ‘circ pump’ is the small pump that runs the heater and has a dedicated return.
