What does high limit mean on Arctic spa?
Temperatures in excess of 112oF (44.5oC) can cause injury to bathers, as a result the heater and pumps are disabled to prevent further heating of the water. The topside display flashes “HL” on the screen to signal an Over Temperature. If the temperature of the heater barrel is > 119oF (48oC) a High Limit (HL) Error is triggered.
Why do I get an error code on my Arctic spa?
A Temperature Probe Error may occur when the temperature probe is disconnected from the base board. If the temperature probe is disconnected, the spa pack has no feedback to control the heater and temperature. As a result, the heater is prevented from running to avoid the water temperature from reaching unsafe levels.
Why is my Arctic Spa hot tub overheating?
So the first thing to remember is that the Arctic Spa is designed to utilize the excess heat from the motors to heat the water. So as we go through that filtration cycle, that motor is going to be running and it’s gonna be generating heat.
What should water temperature be on Arctic spa?
Over temperature. The water temperature of the spa is > 112oF (44.5oC) High limit. The temperature of the heater barrel is > 119oF (48oC) Flow Switch Open. The flow switch is reading no flow while pump 1 is running. Flow Switch Closed. The flow switch is reading flow while pump 1 is off.
Why do I get error messages on my Arctic spa?
The following hot tub error messages may show up on your arctic spas if there is a potential problem. Follow the recommended action to relive the issue. Temperature probe error. Temperature probe is disconnected from the base board and so the hot tub has no feedback to control the temperature. Contact your supplier. Or a local hot tub technician.
Why is my Arctic Spa hot tub not working?
Temperature probe is disconnected from the base board and so the hot tub has no feedback to control the temperature. Contact your supplier. Or a local hot tub technician. DO NOT ENTER THE WATER.
Over temperature. The water temperature of the spa is > 112oF (44.5oC) High limit. The temperature of the heater barrel is > 119oF (48oC) Flow Switch Open. The flow switch is reading no flow while pump 1 is running. Flow Switch Closed. The flow switch is reading flow while pump 1 is off.
What does TST mean on Arctic Spa hot tub?
Topside has been fully locked. To unlock, press and hold pump 1 button for 5 seconds. When the spa is powered up it perform a check to see if the ‘hi-limit’ probe is attached to the heater. While this is happening ‘tst’ will be displayed. No action needed. Carrying out a check. If the heater probe test above fails then this will be displayed.
