What does FLO2 mean on a hot tub?
flow switch
You should always consult the manufacturers instruction booklet for specific information, however generally it is found that: FL1 hot tub code – indicates that there is an error with the flow switch and it is stuck in the open position.
Does the FlO2 display tell me to replace flow switch?
Standing by. the tub is a 2005 majesta series 880 by sundance. yes i am at the tub now. i do have the panel open Thank you for that information. That means that your particular hot tub uses a flow switch to detect flow through the heater. FLO2 in your case, means the flow switch was closed before the circulation pump started.
Why did my Sundance 880 get a FlO2 error?
Have a 2010 Sundance Optima 880 spa (OXO3LCD-100378459-0710) giving me FLO2 error. After dropping the curtain to look for the flow switch (and giving it 2 power cycles) it came back to life. When it wasn’t running, flow switch open—closed once flow resumed.
What causes a FL2 error code on a hot tub?
Generally speaking, an FL2 error code is caused by one of two components, and for three different reasons. The first reason would be that the flow switch/pressure switch has failed and is delivering a closed circuit at all times.
What’s the difference between FL1 and FL2 error codes?
An FL2 error code and FL1 error code are often confused for one another. While an FL1 error code means the spa isn’t sensing enough water flow to close the flow switch, the FL2 error code means exactly the opposite.
Standing by. the tub is a 2005 majesta series 880 by sundance. yes i am at the tub now. i do have the panel open Thank you for that information. That means that your particular hot tub uses a flow switch to detect flow through the heater. FLO2 in your case, means the flow switch was closed before the circulation pump started.
Have a 2010 Sundance Optima 880 spa (OXO3LCD-100378459-0710) giving me FLO2 error. After dropping the curtain to look for the flow switch (and giving it 2 power cycles) it came back to life. When it wasn’t running, flow switch open—closed once flow resumed.
What does Flo code mean on Sundance heat pump?
I found it easily at the Sundance site online and keep a copy on my computer for reference. Nine times out of ten, a flo code means the pressure switch isn’t working, and ergo your circa pump wont work right, nor usually the heat. It’s a cheap part and won’t take a repair guy more the 20 minutes to fix.
An FL2 error code and FL1 error code are often confused for one another. While an FL1 error code means the spa isn’t sensing enough water flow to close the flow switch, the FL2 error code means exactly the opposite.
