What does Flo mean on my Sundance spa?
Flow Switch
FLO. Stands for Flow Switch. Means that the flow switch is malfunctioning or the flow of water is being inhibited. The heater is deactivated and filter/circulation may be deactivated, also. Check for clogged filter and proper water levels in the hot tub.
What does Eloc mean on hot tub?
Temperature Lock is most often used by those who do not want others to. change the set temperature of the spa water. To activate the temperature lock, press SET button. When the SET icon flashes press the Temp Up () button.
When to use Hayward diagnosti chlorinat AUT no flow LED flashing?
O HAYWARD Diagnosti Chlorinat Aut No Flow LED flashing or ON No Flow LED will flash for up to 60 seconds on start-up. No Flow LED will be ON when there is a flow switch problem. Power Generating Super Chlorinate Remotely Controlled -r No Flow Cheek Salt High Salt nSpect Cell If LED is ON, check for flow switch installed backward.
How to diagnose a Flo message on a hot tub?
Answer: When diagnosing a FLO message it is important to consider that there are 3 different types of FLO messages that your Spa’s logic is capable of displaying (a Solid FLO message, a Flashing FLO message and a Solid FLO2 message). First determine which message you are seeing.
What to do if your GFCI is flashing Flo?
Make sure there is nothing in the filter area and turn your GFCI back on again. If the Flashing FLO message goes away within a minute then you have found where the problem lies with a dirty or soiled filter.
What does HFL stand for on a hot tub?
HFL: Substantial difference between temp sensors detected. Could indicate a flow problem LF: Persistent low flow problems. (Displays on the 5th occurrence of “HFL” message with 24 hours). Heater is shut down, but other spa functions run normally.
What should I do if my no flow led is flashing?
If the No Flow LED is flashing, wait 60 seconds after starting your pump and filter. Ensure there are at least 12 inches of straight pipe before the flow switch. There should be NO elbow after the flow switch. Step 1: Wait 60 seconds after the pump starts.
What does a flashing Flo on a circ pump mean?
Typically Solid FLO msgs are related to a blockage, bad Flow switch and or connection, summer logic, bad PWA. Typically the circ pump would be off with a Solid FLO. A Flashing FLO msg could mean other things like a soiled filter, low water level, stuck weir door (not enough water supply to circ pump).
Make sure there is nothing in the filter area and turn your GFCI back on again. If the Flashing FLO message goes away within a minute then you have found where the problem lies with a dirty or soiled filter.
Answer: When diagnosing a FLO message it is important to consider that there are 3 different types of FLO messages that your Spa’s logic is capable of displaying (a Solid FLO message, a Flashing FLO message and a Solid FLO2 message). First determine which message you are seeing.
