What does Flo code mean on a hot tub?
issue with water flow
FLO Error Message If your tub is displaying this message it simply means that there is an issue with water flow. The most common reasons for the FLO error message are dirty filters, a low water level, clogged circulation pumps or bad sensors. The first thing you should do is check your tub’s water level.
What does Flo error on my Sundance spa mean?
A FLO error is going to indicate something is wrong with your circulation system, so start with the simplest problem: your filter. Even if you think it should be fine, give it a try. Sometimes we can’t see the problem with our eyes.
Why did my Sundance 880 get a FlO2 error?
Have a 2010 Sundance Optima 880 spa (OXO3LCD-100378459-0710) giving me FLO2 error. After dropping the curtain to look for the flow switch (and giving it 2 power cycles) it came back to life. When it wasn’t running, flow switch open—closed once flow resumed.
Can a closed flow switch on Sundance Spas be repaired?
CLOSED or SHORTED FLOW SWITCH ON SYSTEM STARTUP (system disabled) Flow switch is non-functional. This must be repaired only be a Sundance Spas dealer or qualified service technician.
How can I tell if my Sundance spa filter is defective?
The only way to test this is to make sure there is no loose debris in the spa, then pull the filter out and see if the flow error goes away, if it does, it is the filter. 2. Defective Circ Pump or Flow Switch: Need to check for Circ Pump operation.
A FLO error is going to indicate something is wrong with your circulation system, so start with the simplest problem: your filter. Even if you think it should be fine, give it a try. Sometimes we can’t see the problem with our eyes.
Have a 2010 Sundance Optima 880 spa (OXO3LCD-100378459-0710) giving me FLO2 error. After dropping the curtain to look for the flow switch (and giving it 2 power cycles) it came back to life. When it wasn’t running, flow switch open—closed once flow resumed.
Why does my Sundance spa not heat up?
It sits 3. I have noticed that that I have a constant FLO error, and the water will NOT heat unless the jets are running. I also believe that my circulation pump is causing these issues. It buzzes and is warm to the touch, but I can’t feel the water moving at all. I just don’t think it is working properly.
The only way to test this is to make sure there is no loose debris in the spa, then pull the filter out and see if the flow error goes away, if it does, it is the filter. 2. Defective Circ Pump or Flow Switch: Need to check for Circ Pump operation.
