What does FL code mean on a hot tub?
Some of the most common hot tub error codes are FLO, FL1 or FL2, and are picked up by flow or pressure switches. The most common causes for this are a dirty or damaged filter, low water levels, air in the pipework or a faulty pump or sensor..
How do I get my Beachcomber hot tub out of sleep mode?
Press any button to exit standby mode. Note: If hot tub is in a heat cycle when standby is selected the 2 speed pump or Hush Pump will run for approximately 15 seconds. On all systems, the 2 speed filter pump or Hush Pump and ozone generator will run during filtration.
What chemicals do I need to start my hot tub?
This all-in-one kit includes all the essential items you will need to start up your hot tub, including:
- AquaChek 6in1 Test Strips (50 Strips)
- Granular pH Minus (2 lbs.)
- Granular pH Plus (1.5 lbs.)
- Granular Non-Chlorine Shock (2 lbs.)
- Liquid Prevent II (16 oz.)
- Granular Chlor-Aid (2 lbs.)
What do error codes mean on Beachcomber Hot Tubs?
These are the error codes and display messages that Beachcomber hot tubs may display, along with what they mean and the action required: Means there is no message to display. The power was shut off to the hot tub. GFCI breaker is still on, however, control panel displays blank. Fuse (s) to system is/are blown.
Is there a money back guarantee on Beachcomber Hot Tubs?
The company offers a 30-day money back guarantee on their products, and they also offer many innovative design options such as the Hybrid3 and custom jetting. One of the main focal points of Beachcomber Hot Tubs is producing products that are as energy efficient as possible.
Why is my Beachcomber Hot Tub in standby mode?
The blower and pumps activate automatically in spite of the status of the hot tub unit. Means the hot tub unit has entered Standby mode. Check that the Microfilter is in place and secure before depressing any buttons to remove the hot tub unit from Standby.
Where is the knife valve on a Beachcomber Hot Tub?
Verify that the knife valve located on the heater’s return side is closed – once verified it’s closed, be sure all the knife valves are in the open or up position. Shut the power down to the hot tub and call the Beachcomber store if the hot tub won’t reset.
These are the error codes and display messages that Beachcomber hot tubs may display, along with what they mean and the action required: Means there is no message to display. The power was shut off to the hot tub. GFCI breaker is still on, however, control panel displays blank. Fuse (s) to system is/are blown.
The company offers a 30-day money back guarantee on their products, and they also offer many innovative design options such as the Hybrid3 and custom jetting. One of the main focal points of Beachcomber Hot Tubs is producing products that are as energy efficient as possible.
How long does the Beachcomber factory guarantee last?
Beachcomber Clients can enhance their factory two year equipment Guarantee if they so desire. This option adds an additional 3 years to the factory equipment guarantee, to bring it to a full five years of coverage under the factory guarantee guidelines.
The blower and pumps activate automatically in spite of the status of the hot tub unit. Means the hot tub unit has entered Standby mode. Check that the Microfilter is in place and secure before depressing any buttons to remove the hot tub unit from Standby.
