What does ER mean on hot tub?
The Big List of Spa and Hot Tub Error Codes
| CODE | ERROR CODE DESCRIPTION |
|---|---|
| CoLd | Cold – water is 40° or less; system should self-start pump/heater |
| Cool | Cool – water is 20° below set point; system message, not an error |
| CP-ER | Circulation pump error |
| dr, dy, dry | Dry – low water volume detected in heater |
Which is the correct error code for spa?
(Displays when first powered up after refill). Spa operating in Standard Mode. Spa operating in Economy Mode. Safety Suction, Spa is shut down. Spa operating in Standard-in-Economy Mode. Overheat Protection (Heater is deactivated, pumps low speed is activated). Spa water is more than 20° F cooler than the temperature set point.
When does spa go into priming mode what does it mean?
Inadequate water detected in heater.. Inadequate water detected in heater. (Displays on third occurrence of “dr” message). Spa is shut down. When spa is first actuated, it will go into Priming Mode. Interlock failure – possible pump or ozone spike. Unknown water temperature. (Displays when first powered up after refill).
Why does Maax spas water pump auto reset?
Once water temperature is below 108°F (42.2°C), system auto resets.Could indicate a pump operating at low speed for an extended time, constant filtering due to a programming error or a faulty pump. DO NOT GET INTO THE WATER! Take off the heat shield cover to allow the water to cool down.
What to do if your Maax Spa is not working?
Take off the heat shield cover to allow the water to cool down. Make sure that the slice valves are open and reprogram the spa to make sure there are no overlapping time cycles. Open all jets. Contact the dealer or service organization if the problem continues.
Why do I get error messages on my Master Spa?
In addition to Master Spas hot tub error messages. You may also get a ‘periodic reminder message‘. These are designed to help you remember to undertake proper water care and maintenance. Improper water maintenance is one of the biggest causes of premature hot tub issues as it can damage hot tub components. Every 7 days. Every 7 days.
What to do if your Master Spa hot tub is not working?
DO NOT ENTER THE WATER. Remove the spa cover and allow water to cool. Once the heater has cooled, reset by pushing any button. If the hot tub does not reset, shut off power to the spa and call your supplier for a service.
Take off the heat shield cover to allow the water to cool down. Make sure that the slice valves are open and reprogram the spa to make sure there are no overlapping time cycles. Open all jets. Contact the dealer or service organization if the problem continues.
Once water temperature is below 108°F (42.2°C), system auto resets.Could indicate a pump operating at low speed for an extended time, constant filtering due to a programming error or a faulty pump. DO NOT GET INTO THE WATER! Take off the heat shield cover to allow the water to cool down.
