What does chlorinator off low temperature mean?
‘Chlorinator Off Low Temperature’ means the current chlorinator cycle has been interrupted.
How do I reset my Hayward salt chlorinator?
To reset, move the switch to ‘Off’ and then back to ‘Auto’. Wait for the relay to click (5 to 10 seconds). When the instant salt level is stable (and the negative sign still present), slide switch to ‘Super Chlorinate’ and back to ‘Auto’. It takes about 30 seconds for the unit to settle back on the default reading.
How much chlorine is in Hayward Aqua plus?
The controller is about 2000 PPM off so it is never producing chlorine. I have tried a new salt cell but the same result. Anyone experience this? Post the diagnostics information from your panel…
Why is the salt readout on my Heyward chlorinator high?
Check under the diagnostics menu for the correct cell size. If you select the cell size to t-3, t-5 or t-9 instead of the correct t-15 then the salt readout from the controller will be high salt. Hello! I have a slightly different problem: I recently purchased online a new Heyward/Goldline T-cell-15 chlorinator.
When does the Hayward chlorine system turn off?
SWG’s won’t work below a certain temperature. As btolley mentioned, most swg cells will not produce chlorine at lower temperatures. I think the hayward turns off around 50F. I am not sure, will need to check tonight. Outdoor temperature has been about 60 to 65 degrees during day, and about 40 to 45 degrees at night. I line in Southern California.
Is the chlorinator still off on my salt cell?
My salt cell is new and configured properly and all diagnostic issues check out OTHER than the fact my system still states the chlorinator is off and no flow. The pool is operating just fine and EVERYTHING else is in order.
How does the Hayward pool chlorination system work?
Hayward’s patented salt systems convert dissolved salt into just the right amount of chlorine, resulting in clean, clear, luxuriously soft water that is less work and worry for you—and your wallet. Nearly 1 million households worldwide have chosen to sanitize their pools with Hayward Salt Chlorination Systems.
The controller is about 2000 PPM off so it is never producing chlorine. I have tried a new salt cell but the same result. Anyone experience this? Post the diagnostics information from your panel…
How to read and adjust the Hayward Aqua rite SCG?
The Hayward Aqua Rite Salt Chlorine Generator displays a total of 9 diagnostic parameters that are accessed by pushing the Diagnostic button sequentially. The default display is the Average Salt Level. If the button is not pushed for 30 seconds, the display will revert back to this salt display.
What should the salt level be in my Hayward pool?
Push the diagnostic button until “T-XX” appears on the display. Step 2: Verify the accuracy of the salt readings (2700-3400 pm) with an independent test kit or by taking a water sample to your local pool store for testing. 3200 ppm is the ideal level. If the salt level is below range, add enough salt to achieve a salt level of 3200 ppm.
