What does a spa power variable light do?
The Spa Power Coloured Light is a single coloured light that is either on or off. The Spa Power Variable Coloured light is a light that has the ability to change between 12 different colours and white (see below for user instructions). different operating modes of the Spa Power Variable Colour Light.
How long does it take for a spa power controller to turn off?
If left on the light will automatically switch off after 30 minutes. The Spa Power controller automatically maintains the filtration/sanitising of the spa pool water. The minimum amount of filtration time is programmable by the user and can be adjusted between 0 and 15 minutes per hour (0 to 6 hours per day).
Is there a pump that has only one speed?
This pump is a 3 hp jet pump that is only a single speed, which normally means there’s another pump somewhere else that runs the water through the heating element, I’ve never seen a spa that only has one speed, and with that pump, the only speed would be high speed all the time.
How does the spa power controller work on a pool?
Adjusting Set Temperature. The Spa Power controller gives the user direct control of the pool temperature from the poolside control panel. Holding down the Up or Down button will adjust the temperature set point as shown on the digital readout. There is a slight delay before the buttons operate to reduce the risk of accidental adjustment.
How often should a low speed spa pump be run?
When exploring the different settings and options available thorugh the buttons on your topside, it may be easy to accidentally change the preset filtration cycles duration. The recommended duration is 2:00 hours which means the Spa will run the low speed of the pump for 2 hours every 12 hours .
Can a 24hr circulation pump be fitted to a spa?
There are four possible variations of pump 1 that may have been fitted to your spa, this user guide covers all variations of pump 1 that could have been fitted. Please read sections 3.1 through to 3.4 then follow the section which matches your spa operation. Note: Even if a 24hr circulation pump is fitted there is no button to control it.
How long can you use granular shock leisure time Spa 56?
You can continue using a granular shock Leisure Time Spa 56, or a floating spa sanitizer dispenser with tablets for several weeks, but if you go without filtration longer than a few weeks, you should consider draining the spa after your pump troubles are fixed. Some spas have two pumps, one is the circulation pump and the other is the jet pump.
What does auto mode do on a spa?
When the spa is running in automatic mode, pressing the pump 1 button will deactivate auto mode and set the pump running in Manual low speed. The auto LED is orange when auto mode is enabled and off when in manual low speed or manual high speed. When the pump is in standby mode all indicator LED’s are off.
