What does a Balboa spa heater look like?
A typical Balboa spa heater will look like something similar to the image shown below. The most basic parts of a heater are the housing, sensors, white plastic heater nuts, bulkhead nuts, and on the inside, the heater element.
Can a Balboa water group heater be replaced?
Balboa Water Group does not warranty any such replacements and any replacement voids the warranty of any Balboa Water Group component currently installed on the spa. SPA HEATER ELEMENT REPLACEMENT POSES A SAFETY RISK!
Where is the high limit sensor on the Balboa M7?
Balboa M7 Circuit Board: The reading across the two pins where both the “A” & “B” sensor plug in should read .5 volts DC. 2. Gecko Circuit Board: If you have three flashing dots on the display and there is a red light illuminated on the circuit board then the high limit sensor needs to be replaced.
How does the control panel work on a Balboa?
Balboa’s Patented M7 TechnologyTOPSIDE CONTROL PANELThe control panel activates functions at the touch of a button.Each function will echo from the circuit board to the LCD ina corresponding manner. The panel will also display diag-nostic messages that enable the service technician to easilytroubleshoot the system.
Do you have to be a spa technician to use Balboa direct?
This is NOT intended as a service guide or a means for you, as the consumer, to service your equipment in any way. this information is being provided for informational purposes only. Any and all service should be performed by a licensed spa technician.
Balboa M7 Circuit Board: The reading across the two pins where both the “A” & “B” sensor plug in should read .5 volts DC. 2. Gecko Circuit Board: If you have three flashing dots on the display and there is a red light illuminated on the circuit board then the high limit sensor needs to be replaced.
What’s the warranty on Balboa water group circuit board?
Another number that is helpful in identifying a Balboa Water Group circuit board is the five digit number found on most boards (5****). for more products like this one. This circuit board is a brand new and carries a (1) year manufacturer’s warranty. It can only be returned for warranty issues if installed.
What are the spa panel messages on Balboa?
Common Spa Panel Messages 1 Low Water Level. 2 Blocked Suction Fitting. 3 Blocked Skimmer. 4 Dirty Filter. 5 Too Many Closed Jets. 6 Closed Slice Valve. 7 Heat Related Pump Not Running. 8 Heat Related Pump Not Primed. 9 Contact your Dealer or Service Organization.
