What does 616 mean on a hot tub?
The “616” error code is displayed when your 365 day ClearRay Bulb timer has reached zero. TO reset your ClearRay timer, please refer to our “616” reset instructions here.
What does CL mean on hot tub?
Current time of day
The Big List of Spa and Hot Tub Error Codes
| CODE | ERROR CODE DESCRIPTION |
|---|---|
| CL | Current time of day; system message, not an error |
| COL | Cool – water is 20° below set point; system message, not an error |
| CoLd | Cold – water is 40° or less; system should self-start pump/heater |
What is the 616 code on my Jacuzzi hot tub?
If all else fails contact our Service Support Desk to book service of your ClearRay system. I own a 2010 Jacuzzi J300 hot tub and this morning the 616 code flashed on my LED display. I am also 100% certain that I have the ozonator system instead of the UV bulb system. Using your instructions above, the 616 code cleared.
How many people are in the jacuzzi spa j-355?
The The J-280 also has a very good step to enter the hot tub. The Jacuzzi® Spa J-355 hot tub is a 4 person tub. The J- 355 features 2 deep bucket seats, one lounge and is a deep sitting hot tub. The J-355 has a small but good step to enter the hot tub.
What does an error code mean on a hot tub?
This error code stands for overheat. You can call a tech for assistance, but here is a home remedy you might want to try first: Take the spa cover off and let the water cool down. Program the filter for Economy mode, and cancel the Summer Logic condition, which occurs when the actual water temperature goes above the set temperature.
What does BLB mean on a jacuzzi heater?
If you see some variation of the letters BLB flashing across your control panel, it means that the UV bulb needs to be replaced. You can purchase one from your local Jacuzzi® dealer. Sn1/Sn2. This indicates that there is an open or shorted sensor, which means your heater is disabled and/or your hot tub has deactivated.
If all else fails contact our Service Support Desk to book service of your ClearRay system. I own a 2010 Jacuzzi J300 hot tub and this morning the 616 code flashed on my LED display. I am also 100% certain that I have the ozonator system instead of the UV bulb system. Using your instructions above, the 616 code cleared.
Why is my jacuzzi not working in Arizona?
If you cut power to your hot tub and open your cover for a couple hours to allow the spa to cool, this should correct the issue. If you are in an area with extremely warm conditions (i.e. Arizona), then it is sometimes helpful in the summer to place something between the cover and the hot tub to allow your spa water to breathe.
What should I do if I get an error code on my hot tub?
A: This is absolutely the most common error code for a service call. However, most of the time, there really is nothing wrong with the spa. Turn your breaker off. Remove your filters.
If you see some variation of the letters BLB flashing across your control panel, it means that the UV bulb needs to be replaced. You can purchase one from your local Jacuzzi® dealer. Sn1/Sn2. This indicates that there is an open or shorted sensor, which means your heater is disabled and/or your hot tub has deactivated.
