What do you need to know before buying a new toilet?
Make sure the toilet dimensions will fit your space. Start by measuring the rough-in size. This is the distance between the wall behind the toilet and the center of the drainpipe or the bolts that hold the toilet to the floor. It’s best to perform this measurement before you remove the old toilet.
How can I improve the performance of my toilet?
One of the most effective improvements was to simply enlarge the flush valve from 2 in. to 3 in. or more. Cost. Some of the models that perform well in lab tests are fairly inexpensive. Easy to maintain. Diagnosing problems and finding replacement parts is relatively easy. Tanks can sweat.
Why does my toilet not flush as well as a regular toilet?
If condensation forms on the tank of your current toilet, the same problem will likely occur with any gravity toilet. Big differences in performance. There are still a lot of wimpy flushers out there. You have to do your homework to find a model that performs well. These toilets have a pressure tank inside that works like a big water balloon.
What should the rough in be on a new toilet?
The standard rough-in is 12 inches, though you may encounter 10-inch and 14-inch rough-ins in older homes. You should find the rough-in measurement in the new toilet’s product information.
Make sure the toilet dimensions will fit your space. Start by measuring the rough-in size. This is the distance between the wall behind the toilet and the center of the drainpipe or the bolts that hold the toilet to the floor. It’s best to perform this measurement before you remove the old toilet.
When do you know something is wrong with your toilet?
When there’s something wrong with the plumbing vent system, it impacts water pressure, drainage, and flushing power. You can usually tell something is wrong if you hear gurgling sounds in the drains, start to notice a slow drain in the shower or sink, or smell disgusting sewage odors.
How to know if your toilet supply line is old?
1 Check the supply line connection to the toilet and tighten if needed. 2 Make sure the fill valve assembly is properly secured to the bottom of the tank. 3 Check the supply line. If you see damage or if it is more than 5 years old, replace the supply line.
What causes a toilet to randomly run without flushing?
This is all usually over in less than a minute if everything works correctly. If a toilet randomly runs for a few seconds and empties without flushing, it’s likely the result of a cracked toilet flapper, the chain being caught, the float needing to be lowered, or the refilling tube needing to be repositioned.
