What do you need to know about the AquaLink system?
AquaLink system is an expandable monitoring platform that enables the public utility companies to gain control over their water network in a simple and effective manner. The system is composed by battery powered field devices that are installed on the existing water district meter and a cloud based software that enables mobile online monitoring.
How can I control my pool with iaqualink?
iAquaLink allows you to control your pool anytime, anywhere. Using our free app for your smart phone or web-connected device, you can control all the elements of your pool or pool/spa system, even when you’re on the go.
Why is my iaqualink not connecting to my WiFi?
Could be IP addressing issues, could be WIFI password and encryption issue. Clearly Eero and iAqualink don’t work together well. Can you go back to your Apple wireless and return the Eero?
AquaLink system is an expandable monitoring platform that enables the public utility companies to gain control over their water network in a simple and effective manner. The system is composed by battery powered field devices that are installed on the existing water district meter and a cloud based software that enables mobile online monitoring.
How to turn off power on Aqualink power center?
Turn off power at the main circuit feeding the AquaLink power center to disconnect the power center from the system. Installation manual (H0433500) and owners manual (H0433600), available online at or by calling: USA: 1-800-822-7933 | CANADA: 1-888-647-4004 | AUSTRALIA: 1800-688-552
What can Jandy Aqualink RS systems do for You?
Premium Automation at its Finest Jandy AquaLink RS systems enable total control of your backyard experience. AquaLink RS systems are fully integratabl… See it in action! Control individual pool and spa functions, lighting, and water features from the convenience of your home
How to connect an iaqualink cable to an Aqualink?
Ensure all power to AquaLink is OFF, then remove the dead panel. Pass the iAquaLink cable through the low voltage raceway of the AquaLink. Reinstall the dead panel (and/or close doors if applicable) to ensure high- voltage areas are secured. Connect iAquaLink to the RS485 4-wire connector on the power center board of the AquaLink.
Ensure all power to AquaLink is OFF, then remove the dead panel. Pass the iAquaLink cable through the low voltage raceway of the AquaLink. Reinstall the dead panel (and/or close doors if applicable) to ensure high- voltage areas are secured. Connect iAquaLink to the RS485 4-wire connector on the power center board of the AquaLink.
Turn off power at the main circuit feeding the AquaLink power center to disconnect the power center from the system. Installation manual (H0433500) and owners manual (H0433600), available online at or by calling: USA: 1-800-822-7933 | CANADA: 1-888-647-4004 | AUSTRALIA: 1800-688-552
What are the safety instructions for Aqualink Rs?
Section 1. Important Safety Instructions READ AND FOLLOW ALL INSTRUCTIONS LIRE LA NOTICE TECHNIQUE. All electrical work must be performed by a licensed electrician and conform to all national, state, and local codes. When installing and using this electrical equipment, basic safety precautions should always be followed, including the following:
Who is required to install an Aqualink pool?
FOR YOUR SAFETY: This product must be installed and serviced by a pro fes sion al pool/spa service technician. The procedures in this manual must be followed ex act ly. Failure to follow warning notices and instructions may result in property damage, serious injury, or death.
Who is the AquaLink PDA pool digital assistant?
AquaLink®RS PDA – Pool Digital Assistant H0572300D WARNING FOR YOUR SAFETY: This product must be installed and serviced by a pro fes sion al pool/spa service technician. The procedures in this manual must be followed ex act ly. Failure to follow warning notices and instructions may result in property damage, serious injury, or death.
What can I do with the AquaLink Rs OneTouch?
The AquaLink RS OneTouch commands 32 auxiliaries, filtration systems, chemical automation, precision temperature settings, pump speeds, diagnostics, and multiple mood settings for one‐touch convenience in a simple, menu‐driven system.
Is there an iaqualink app for my Pool?
Remotely optimize settings for energy and cost savings! Connects to home Wi-Fi for access anytime, anywhere. Program, schedule, and troubleshoot pool cleaning 24/7 Perfect for entry-level automation. Control any Jandy variable-speed pump with your smartphone and iAquaLink app
How big is the AquaLink pool OneTouch panel?
The Finest in Pool and Spa Automation Achieve maximum control of all pool and spa equipment with the touch of one button from this compact, elegant, f… The OneTouch panel is small, the size of a double light switch, and can be flush or surface-mounted to fit with any room décor There are no reviews for this product.
Do you need firmware upgrade for Aqualink N forward?
The cost was minimal for me because Aqualink Version N forward requires only a firmware (chip) upgrade that Jandy basically gives away. Yours being an older system will require a board upgrade, which is a bit more expensive.
