What do you need to know about one step awning control?
One needs to hold / lock or pin the roller assemble in place while working on the awning. There is a assist spring used to assist the motor when retracting the Awning. Being a novice you might want to get some help with this repair. There are some videos on the sight that might help also.
Can a motor drive be removed from an awning?
The one item you MUST be careful with is removing the motor drive. One needs to hold / lock or pin the roller assemble in place while working on the awning. There is a assist spring used to assist the motor when retracting the Awning. Being a novice you might want to get some help with this repair.
What is the model number of an A & E awning?
They do not wire them all the same and even the A&W colors can change over time. By chance are there any model or serial numbers on your one step that you could provide. Rich. It is an A&E awning on a 2002 Allegro Bus. The model # is 716AN18.0018 Prod # 958303194 Ser # 14691958 11-26-01
How to rewind an awning in an RV?
With help and knowing how to remove the motor, one should be able to rewind the awning. Use cable ties (some big ones) to hold it in place so you can move the coach if necessary, to get to a service location. Keep an eye on it if you need to drive any distance !!!!
One needs to hold / lock or pin the roller assemble in place while working on the awning. There is a assist spring used to assist the motor when retracting the Awning. Being a novice you might want to get some help with this repair. There are some videos on the sight that might help also.
What to do if your power awning won’t retract?
Remove the plastic covers from both ends of the awning and look for any damaged bearings or broken gears on the motor side. If you tried connecting 12V directly to the motor during the electrical checks and nothing happened your motor is dead. Or if like mine, it makes a lot of noise and moves very slowly, it needs to be replaced.
How do you remove an awning from a RV?
Use the manual override if the motor is completely dead. Tie the awning arms off to the bracket where it attaches to the side of your RV. Do this on both ends. This prevents the awning from unrolling completely when the motor is removed. Remove the front and back covers from the motor on the right side of the awning.
The one item you MUST be careful with is removing the motor drive. One needs to hold / lock or pin the roller assemble in place while working on the awning. There is a assist spring used to assist the motor when retracting the Awning. Being a novice you might want to get some help with this repair.
