What do you need to know about Jandy Aqualink Rs?

Jandy Aqualink RS systems provide automation for your pool, spa, and backyard. Aqualink RS is the full featured version of the Aqualink product line. There are also the AquaLink PDA and Aqualink Z4 products that have different control devices, user interfaces, and functionality.

What makes a Jandy pool heater so good?

Providing industry-leading engineering, Jandy’s innovative line of pool heaters and heat pumps are designed to deliver quality, energy-efficient heating solutions so you can enjoy a longer swim season in your pool. The perfect pool is neither too hot nor too cold.

What’s the difference between Aqualink PDA and Aqualink Rs?

Aqualink RS is the full featured version of the Aqualink product line. There are also the AquaLink PDA and Aqualink Z4 products that have different control devices, user interfaces, and functionality. This Jandy Automation Selection Guide shows the family of modular components across the different Aqualink models – RS, PDA & Z4.

How to enable spillover control on Jandy pool?

If a non-booster pump cleaner is installed, plug the JVA into the cleaner JVA socket. If you have a pool and spa you can enable the Spillover function with dip switch #3 on the main panel. When switch #3 is on then AUX3 becomes the spillover control.

Jandy 4-function spa-side switch for use with all AquaLink RS Systems. Jandy SpaLink RS 8-function Spa Side Remotes. Control filter pump, heater, solar, spa and 7 auxiliary circuits. For use with any AquaLink RS control, above water use only. Jandy Valve Actuator, 24 volt Automates any 2-way and 3-way diverter valves for pool/spa.

Which is the Jandy pool and spa upgrade kit?

The Jandy R0468501 AquaLink RS8 Pool and Spa Upgrade Kit boasts the latest Revision QQ software to effectively automate all your pool and spa controls.

Which is the latest Aqualink Rs8 upgrade kit?

Its upgraded firmware adds new interfaces while enhancing older features for new and improved methods of control over pool and spa equipment. This Jandy Upgrade Kit includes a CPU board, chip and bezel for Jandy AquaLink RS8 systems.

How to install an Aqualink Rs pool control system?

Step 4: Install OneTouch PCB from AquaLink RS System into Wireless cradle and plug transformer into standard outlet. Power Supply: 120 volts AC, 60 Hz, 3 amps. Contact Rating: (high volt.) 25 amps, 3 HP @ 240 volts AC, 1.5 HP @ 120 volts AC, 1500 watts incandescent.

What do you need to know about Jandy pool control?

Control individual pool and spa functions, lighting, and water features from the convenience of your home Automate daily pool equipment functions, such as filtration, sanitation, and cleaning and create one-touch macros Love the automation at my finger tips. Easy to use and understand. Love total control and this system delivers.

Where are the DIP switches on an Aqualink pool?

Press SPA FIL. The dip switches are in the upper left of the load panel to the left of the control panel. See section 7 of the AquaLink RS Control Panel Installation Manual. Older AquaLink boards have a single set of dip switches. Newer boards have a second set of dip switches.

Is the aquapalm compatible with the AquaLink Rs?

The AquaPalm works with an AquaLink RS System ONLY, software revision “M” or later. The AquaPalm has a waterproof housing that floats; large backlit display and buttons; 500 foot range; and runs for months on 2 AA batteries.

Do you need line of sight for Aqualink?

This state-of-the-art wireless system transmits through walls and around corners and does not require line of sight for operation. About AquaLink RS Home Automation: Now you can integrate Jandy’s AquaLink RS pool/spa control system into your whole home network.

What are emergency service switches on Aqualink Rs?

Emergency Service Switches: All circuits. Tranceiver will transmit through walls and around corners (does not require line of sight. Steel framing, aluminum siding, wrought iron, cyclone fences, and leaded glass may prevent communication between the AquaLink RS Control Panel and The Power Center.

Is there a wireless remote for the AquaLink Rs?

The AquaPalm is an add-on wireless remote for the Aqualink RS system and AquaLink Touch, OneTouch and All Button Control Panel Interfaces. It consists of the remote PDA and an 18 channel J-box transceiver that is different then the iAqualink J-Box transceivers.

Are there any Aqualink Rs8 power center boards left?

Only 1 left! Jandy Zodiac R0586503 AquaLink RS8 P&S Power Center board. Only 1 left! Jandy Aqualink RS6 Complete Bezel/PCB/Chip Kit REV J Pool/Spa P&S EXC!! 8 product ratings – Jandy Aqualink RS6 Complete Bezel/PCB/Chip Kit REV J Pool/Spa P&S EXC!! Only 1 left!

How does the AquaLink Rs all button work?

Designed for Your Convenience The AquaLink RS All Button is attractively styled, easy to operate, and has a single line digital screen that displays t…

What can Jandy Aqualink RS systems do for You?

Premium Automation at its Finest Jandy AquaLink RS systems enable total control of your backyard experience. AquaLink RS systems are fully integratabl… See it in action! Control individual pool and spa functions, lighting, and water features from the convenience of your home

What kind of pool control system does Aqualink use?

AquaLink® RS Pool/Spa Control System. Automate any pool or pool/spa functions including: heater control, pump and variable speed pump control, smart color lighting control, salt water chlorinator control and more..

How to set up a Jandy pool control system?

Programming is easy and setup can be done from the indoor touch pad, a personal computer or service control panel. Bundle Starter Packs Bundle Packs offer the ultimate in value and ease-of-ordering.

What kind of pool equipment does Jandy use?

Build the perfect pool environment with Jandy professional-grade equipment. With a full line of pumps, filters, heaters, lights, valves, water sanitizers, and the automation solutions to control it all, Jandy has the complete package for any pool. Brands

How big is the wireless transmitter on Jandy Aqualink?

The Jandy AquaLink RS Wireless system comes with a 2.4 GHz RF (Raidio Frequency) transmitter powerful enough to cover 300 ft. of your backyard area and gather operational status of your pool and spa equipment without loss of control system features.

What are the controls on a Jandy pool?

Jandy controls are designed to manage program times, operate up to 32 pool, spa and landscape features, rotate valves, dim lights, choose appropriate pump speeds and set precise temperatures, chlorine production and colors for the perfect backyard paradise.