What chemicals do I need for a hot tub start up?

The 4 most common chemicals tested in a spa are chlorine/bromine, pH, alkalinity and calcium hardness. If you are using an alternative sanitizer, the chemicals needed for start-up will vary.

How do you shock a hot tub for the first time?

To shock your hot tub, simply follow these easy instructions.

Adjust the pH levels of your spa’s water to between 7.4 and 7.6.
Remove the hot tub cover so your spa can breathe while being shocked.
Turn off the air to the jets but leave the circulation pump running so the water is moving but is not too agitated.

How often should you put chlorine in a hot tub?

How Much Chlorine Should I Add to my hot tub? A chlorine level of between 3-5mg/l must be maintained in your hot tub at all times. The addition of chlorine will depend upon usage and bathing habits. It could be daily or every 2-3 days (for 1mg/l add 2g per 1000 litres).

What to do when filling a hot tub for the first time?

When you fill your hot tub for the first time, it’s important to use a pre-filter. The pre-filter will help remove suspended solids from the water and make it easier to keep chemicals balanced. The first step to enjoying your hot tub is filling it with water.

Do you need a pre filter for a hot tub?

The pre-filter will help remove suspended solids from the water and make it easier to keep chemicals balanced. The first step to enjoying your hot tub is filling it with water. Whether you are a first-time hot tub owner or veteran, it’s important to follow a few guidelines.

How often should you test your hot tub water?

If you are new to hot tub care, the key word is “once.” You should check the water once before use, once a week and once a month. While it might seem like a lot, it does not take a lot of time to test the chemical levels — less than five minutes.

How is a hot tub brought into a Master Spa?

When you talk to your contractor, make sure that they know how much the hot tub will weigh with water. This information can be found in an owner’s manual, which Master spas makes available online. Depending on your space, your hot tub will be brought in on a dolly, forklift, or crane.

When to fill your hot tub with fresh water, is it ready for use?

Posted: December 8, 2017. When I Fill My Hot Tub With Fresh Water, Is It Ready For Use? Even though you’ve essentially filled your Caldera ® Spas hot tub with clean drinking water, you’ll need to do some initial hot tub water balancing to provide a foundation for its use. Modern hot tub water maintenance has never been easier than it is today.

What’s the best way to start a hot tub?

It’s important to start off on the right foot with your water chemistry. The initial start-up can make water care easier and save time down the road. You’ll test the water in the hot tub, first checking the pH and total alkalinity. If the levels are out of range, you will balance those chemicals first.