What causes a Vita Spa to shut down?
If the problem persists, contact the dealer or service organization. Sensors detect lack of water to the heater. Heater will shut down, but other function of the spa will continue to operate normally.Issue is possibly caused by closed slice valve or blocked suction return/skimmer/filter.
What to do if your Vita spa freezes?
Take off the heat shield cover to allow the water to cool down. Make sure that the slice valves are open and reprogram the spa to make sure there are no overlapping time cycles. Open all jets. Contact the dealer or service organization if the problem continues. Sensor detects possible freeze conditions.
What does cover guy on Vita spa stand for?
The Cover Guy provides all Vita Spa replacement covers so you are guaranteed a perfect fit every time. These are the error codes and display messages that a ThermoSpas Hot Tub may display, along with what they mean and any actions required: Stands for “Overheat”- and the tub shuts down.
What does it mean when your spa heater shuts down?
Spa heater shuts down automatically until temp falls below 108°F (42°C).Could indicate a pump operating at low speed for an extended time, constant filtering due to a programming error or a faulty pump. DO NOT GET INTO THE WATER! Take off the heat shield cover to allow the water to cool down.
Why does my Vita spa not turn on?
Overheating condition where a water temperature sensor has detected water temperatures of 110°F (43.3°C). Spa functioning is then disabled until temps fall below 108°F (42.2°C).Could indicate a pump operating at low speed for an extended time, constant filtering due to a programming error or a faulty pump. DO NOT GET INTO THE WATER!
How do I Reset my Vita Spa hot tub?
If your Vita Spa controls stop working, the company recommends performing a system reset before troubleshooting or calling for repair. Resetting your hot tub involves pressing a particular combination of buttons on the control panel. Tap the “Prog” button until the time appears on the display. Press and hold down the “Down” arrow button.
What are the error codes on the Balboa spa?
Balboa Spa Side Error Codes pd Power supply, unit running on battery ba OH Sensors reading 112-118° F. OHH Overheat. Spa has shut down. One sensor OHS Overheat. Spa has shut down. One sensor
Spa heater shuts down automatically until temp falls below 108°F (42°C).Could indicate a pump operating at low speed for an extended time, constant filtering due to a programming error or a faulty pump. DO NOT GET INTO THE WATER! Take off the heat shield cover to allow the water to cool down.
