What causes a Raypak 130A heater to shut off?
Raypak 130A Ignites and then shuts off. New to this forum and have a Raypak 130A heater that has just started acting up on us. It intermittently won’t stay running. It will spark and open the valve and ignite the burner but then within seconds you hear the valve close and of course the flame goes out.
Why does my Raypak pool keep shutting off?
It will spark and open the valve and ignite the burner but then within seconds you hear the valve close and of course the flame goes out. It mostly seems to happen on cool or damp mornings and will eventually stay running but it may take numerous restarts to do it.
Why do you need a Raypak pool heater?
Your Raypak pool heater keeps your pool comfortable throughout the seasons. So naturally, it gets a lot of use during that time. While pool heat pumps are built to provide countless hours of heat, they still need maintenance to stay at peak performance.
What to do if your swimming pool heater is not working?
Make sure that the pilot is lit (millivolt heaters). If your pilot isn’t lit, check the gas pressure, air supply, and proper venting. Make sure the pilot tube is intact and not clogged. For MV heaters, if the pilot won’t stay lit, check the output on the thermocouple. Is the gas supply valve in the ON position?
Why does my Raypak pool heater keep sparking?
If the unit continues to spark after the pilot is lit, you most likely have a bad system board. A lot of home furnaces are done the same way. It has to do with how the flame proving circuit works for that style of control board. You must log in or register to reply here.
How long does it take for a Raypak gas heater to shut off?
The circuitry in the electronic ignition heaters relies on a flame sensor to ensure there is combustion. If the sensor does not see/detect a flame or the electrical continuity thru the flame is not sufficient, the circuitry will shut the gas flow off after a pre-determined amount of time. Usually this is in the 5 second range.
How long does it take for a Raypak pool to shut off?
If the sensor does not see/detect a flame or the electrical continuity thru the flame is not sufficient, the circuitry will shut the gas flow off after a pre-determined amount of time. Usually this is in the 5 second range.
Why does my pool heater keep turning off?
If one day you wake up and your pool heat pump stops running, the first thing to check is your water flow. Without an adequate source of water, a pool heat pump automatically shuts down to prevent overheating. This is sometimes the cause of what many describe as a pool heat pump turning off and on.
What to do if your Raypak 130A ignites?
It needs to be clean These can be cleaned with steel wool. Do not use sandpaper as most sandpapers contain silicones that can be deposited on the probe and insulate them Also, be careful on your ignitor as it is a two pronged type and like a spark plug, there is a gap between the two that has to be be set right for it to work properly.
What should the discharge temp be in a heat pump?
You can easily check the discharge line in the winter, while suction superheat and even subcool can be more difficult to access. The old-timers who trained me would say that the discharge temp will be “about 100 degrees over outdoor ambient” when a properly functioning heat pump system is running in heat mode.
Why is discharge line temperature a useful reading?
For what it’s worth, when I check A/C systems, I commonly see discharge line temperatures between 160 to 180 degrees on properly functioning systems at typical summer conditions in Florida. A high head or low suction pressure can cause a higher discharge line temp.
What’s the maximum temperature for a Raypak 130A heater?
Pregnant women should stick to the 100°F (38°C) This appliance is to be installed and operated by maximum rule. 140 lbs. The model identification number and heater serial number are found on the heater rating plate.
What should I do if my Raypak 130A catches fire?
To do so may result in an explosion or fire. • Do not try to light any appliance. • Do not touch any electrical switch; do not use any phone in your building. • Immediately call your gas supplier from a neighbor’s phone.
What kind of valve does a Raypak pool heater use?
Standing Raypak 011589F Combination Valve Pro. MV Raypak 011591F Combination Valve Pro. DSI Raypak 011589F Combination Valve Pro. MV Raypak 011591F Combination Valve Pro.
What is the model number of the Raypak pool heater?
MV Raypak 011591F Combination Valve Pro. DSI Raypak 011589F Combination Valve Pro. MV Raypak 011591F Combination Valve Pro. DSI
If the sensor does not see/detect a flame or the electrical continuity thru the flame is not sufficient, the circuitry will shut the gas flow off after a pre-determined amount of time. Usually this is in the 5 second range.
Which is the best Raypak pool and spa heater?
Raypak / Rheem is a leader in the industry for both residential and commercial pool and spa applications. Please feel free to give us a call when selecting the best model for your application. Looking for the new Professional Series or 84 Professional models?
Raypak 130A Ignites and then shuts off. New to this forum and have a Raypak 130A heater that has just started acting up on us. It intermittently won’t stay running. It will spark and open the valve and ignite the burner but then within seconds you hear the valve close and of course the flame goes out.
What does Raypak low noxheater water heater do?
RayPak Low NOxheaters are available in Natural gas only. Microprocessor-controlled Thermostat, Self-Diagnostic, Both water temperature and flow rate inside the heater are controlled to help eliminate condensation, sooting and scale buildup that can shorten the life of a heater.
What kind of igniter does Raypak 130A use?
There are two different types of igniters on electronic ignition units. One is a glow bar type that is a ceramic type of bar that glows red hot to ignite the flame. The other is a spark type that has two metal probes that a spark jumps across to ignite the flame.
Why is my Raypak pool heater no pilot sensed?
Raypak pool heater no pilot sensed error is related to error code FFL. When you receive this error message, check if the pilot light stays on when the CFH is normal. If the light stays on, the pilot valve could be open. Replacing the gas valve would fix it.
What makes up the coil on a Raypak pool heater?
The evaporator coil is the part responsible for turning harvested warm air into usable heat for your pool. Each day, a bunch of air passes through the coil. Over time, the coil begins builds up a layer of debris, dirt, and grease from processing so much air.
Do you need to troubleshoot a Raypak pool heater?
Effective Raypak pool heater troubleshooting is all about knowing what to look for, and what the signs mean. Although all pool heat pumps need maintenance to maintain performance, a bit of troubleshooting can save you a lot of time. When you know what’s causing a problem with your pool heater, then fixing it is way simpler.
Make sure that the pilot is lit (millivolt heaters). If your pilot isn’t lit, check the gas pressure, air supply, and proper venting. Make sure the pilot tube is intact and not clogged. For MV heaters, if the pilot won’t stay lit, check the output on the thermocouple. Is the gas supply valve in the ON position?
Why is my pool heater cycling on and off?
If you are running your variable speed pump on the low setting, make sure you meet the minimum GPMs for your heater. If your swimming pool heater is cycling ON and OFF, it is an early indication that the electrical connection or power supply is experiencing issues.
