What causes a faucet to leak on a clawfoot tub?
When a compression faucet leaks, the problem is usually a worn washer on the base of the valve stem, although it may also be wear in the valve seat itself. To diagnose the problem, you have to remove the valve stem from the faucet body.
How do you get water out of a clawfoot tub?
In order to disconnect the water supply from the clawfoot bathtub, you will need the help of an adjustable wrench. Remove the pipes from the nut connections. Remove the pipes that connect your bathtub to the floor. This plate is attached with screws or nuts. Use a screwdriver to safely remove it.
When was the first clawfoot tub made?
Clawfoot tubs made their first appearance around this time but didn’t become a “thing” until the early 1900s. Tub manufacturers identified their products with stamps that often included the date of manufacture.
Why is there no stamp on a clawfoot tub?
The absence of a stamp on a cast-iron clawfoot tub could mean it’s a mid-20th century generic model, but it could also mean the tub was produced before stamping became commonplace. An unstamped tub that lacks faucet drillings could have been custom-made for a well-to-do household in the mid 1800s or earlier.
When a compression faucet leaks, the problem is usually a worn washer on the base of the valve stem, although it may also be wear in the valve seat itself. To diagnose the problem, you have to remove the valve stem from the faucet body.
What should I use to replace my clawfoot tub drain?
Take the tub drain hole and attach the strainer. Use and adjustable wrench to attach it, and put putty on both ends to help the connection stay strong and avoid leaks. There should be a plate that needs to be placed from inside the tub to the drain.
Clawfoot tubs made their first appearance around this time but didn’t become a “thing” until the early 1900s. Tub manufacturers identified their products with stamps that often included the date of manufacture.
Why are the top of my clawfoot tubs pitted?
Turns out nothing was pitted, but there were just some really really bad hard water deposits on top of the tub… which meant if we could scrub them off, we’d find more of that original white finish under them!
