What can Aqua logic be used to control?
The Aqua Logic can control pumps, valves, lighting, heaters, and chlorination. Although the Aqua Logic is easy to use, it is important to completely read through this operating manual before attempting to operate the control. NOTE: This manual assumes that the Aqua Logic has been wired and configured according to the Instal- lation Manual.
Why is my Aqua Logic showing ” communication error “?
We have a Hayward Aqua Logic Filter system and everytime we We have a Hayward Aqua Logic Filter system and everytime we turn the spa on, after 15 minutes the entire system shuts down and we get an error of ‘No Flow Filter Pump’. Can you help me with this probl…
What is the default display on Aqua logic?
Turn power on at the main panel and turn the Aqua Logic control power circuit breaker on. The keypad will show the default display. The default display alternates between the day/time, air and pool (or spa) temperature, pool/spa sanitizer setting, and salt level.
How many valve actuators can an aqua logic Aql-P-4 control?
The AQL-P-4 can control up to 4 high voltage (120/240V) pieces of equipment, up to 3 automatic valve actuators, and a conventional and solar heater. Both manual and automatic (programmed) operation are available.
The Aqua Logic can control pumps, valves, lighting, heaters, and chlorination. Although the Aqua Logic is easy to use, it is important to completely read through this operating manual before attempting to operate the control. NOTE: This manual assumes that the Aqua Logic has been wired and configured according to the Instal- lation Manual.
We have a Hayward Aqua Logic Filter system and everytime we We have a Hayward Aqua Logic Filter system and everytime we turn the spa on, after 15 minutes the entire system shuts down and we get an error of ‘No Flow Filter Pump’. Can you help me with this probl…
Turn power on at the main panel and turn the Aqua Logic control power circuit breaker on. The keypad will show the default display. The default display alternates between the day/time, air and pool (or spa) temperature, pool/spa sanitizer setting, and salt level.
The AQL-P-4 can control up to 4 high voltage (120/240V) pieces of equipment, up to 3 automatic valve actuators, and a conventional and solar heater. Both manual and automatic (programmed) operation are available.
What kind of remote does the Hayward Goldline use?
Hayward Goldline automatic controls sold here. All models available. W3PRO15-2 includes 24″ cable. For versions 2.6 or higher software. Hayward Aqua Puck Wireless Remote Hand-Held 6 – Function Remote For versions 2.5 or lower software. Hayward Aqua Puck Wireless Remote Hand-Held 6 – Function Remote
How big of a pool does Aqua logic need?
The Aqua Logic is designed to handle the purification needs of most residential swimming pools up to 40,000 gallons (150,000 liters), or the needs of most commercial pools up to 25,000 gallons (95,000 liters). Check local codes for other restrictions.
Hayward Goldline automatic controls sold here. All models available. W3PRO15-2 includes 24″ cable. For versions 2.6 or higher software. Hayward Aqua Puck Wireless Remote Hand-Held 6 – Function Remote For versions 2.5 or lower software. Hayward Aqua Puck Wireless Remote Hand-Held 6 – Function Remote
Where to turn off circuit breaker on AquaLogic pool?
To be safe, you should go to your main house panel and turn off the two-pole circuit breaker feeding the AquaLogic panel. Then you can take off the internal cover at the AquaLogic panel and this will uncover all of the internal wiring. With the internal wiring uncovered, perhap we can spot any wiring errors from the original installation.
How can I control my pool with Pro Logic?
Use the chart below to select the appropriate Pro Logic Pool/Spa control system and the optional accessories such as wireless and wired remotes, salt water chlorine generator, pH and chlorine sense and dispense. Do you want to control pool only or both pool and spa?
How many Hayward pump actuators does ProLogic control?
ProLogic: How It Works • All ProLogic systems are salt chlorination ready and can control 4-16 high voltage relays, 3-4 valve actuators and 1-2 heaters. • These systems can manage: Hayward Variable Speed Pumps, ColorLogic Lighting, Sense & Dispense, AquaConnect Homenet, as well as a wide variety of remotes.
How to check the active salt reading on ProLogic?
The active salt readings ~instant salt appears in the Diagnostic Menu. Press the Menu button repeatedly, until the Diagnostic Menu appears. Then press (>) one time. If all zeros or if Chlorinator Off Percentage Met, press ~+ key. IF, after a short countdown delay, the display does not revert to zeros, refer to step 3.
The Aqua Logic is designed to handle the purification needs of most residential swimming pools up to 40,000 gallons (150,000 liters), or the needs of most commercial pools up to 25,000 gallons (95,000 liters). Check local codes for other restrictions.
What kind of warranty does Hayward pool have?
LIMITED WARRANTY (effective 03/01/12) Hayward warrants its Pro Logic, OnCommand and E- Command pool automation products as well as its Aqua Rite, Aqua Rite Pro, Aqua Plus and SwimPure chlorination products to be free of defects in materials and workmanship, under normal use and service, for a period of three (3) years.
